York S1-024-24101-700 24V 20A 2PNO Contactor 24V 20A 2PNO Contactor

24V 20A 2PNO Contactor

Buy genuine S1-024-24101-700 24V 20A 2PNO Contactor from Direct Supplier.Order from www.electricalwholesaleinc.com or call us on [420] 287 [0951]

York S1-024-24101-700 24V 20A 2PNO Contactor

The YORK S1-024-24101-700 24V 20A 2PNO Contactor is an accessory for the following York products:

The YORK 24V 20A 2PNO Contactor is a single phase contactor with two NO (Normally Open) and two NC (Normally Closed) leads. This type of contactor is normally used when small motors are operated by a control panel. The control panel switches the leads to the contacts using a timing cycle set point.

The S1 Series by York Security Products is an innovative power distribution system that consolidates control for devices up to 20 Amps. The line provides control for 120/240 vac or 24Volt; two- or four-wire wye (2PNO) installations. It features SPDT toggle switches with hinged doors, hinged removable vertical hanger frames, hinged panel mounting blocks, and heavy-duty protective circuits

Control equipment up to 24V dc with the Traditional series 20 amp combination. These contactors are built for reliability, they are equipped with starter slots, mounting holes, locked-on indication lighting, handle lockout/tagout switches, and surge ports.

The S1 Series contactors are three-phase wound, oil filled, single-polarity automatic changeover switching devices. They have low interrupting ratings, high inrush current capacity, long service life in severe conditions, and are suitable for switching heavy loads ( up to 750A). The S1 Series contactors are available for voltages up to 690V. For higher voltages consult the factory. For voltages above 690V or special applications consult the York Engineering Department or your local sales office.