York S1-024-27521-000 Product S1-02427521000

Power Relay

Power Relay

The Power Relay Module incorporates this technology into a multifunction controller to help you control the energy usage of various AC loads. This Power Relay Module can replace three separate AC relays, utilizing superior control, communication, and monitoring capabilities to your application.

The Power Relay is a compact, high voltage insulating relay designed for use with any standard contactor rated from 0.4 to 20A at 48VDC or higher. Power Relay may be connected to a 110/120 VAC supply and used as an isolating relay that will switch 110/120 VAC loads from ground at latched coil voltage up to 150/160VAC.

When your are in need of a power relay, you want to make sure that the relay that you are getting is both well built and will work for your needs. We at York are often asked about the product S1-024-27521-000. When someone is looking for a power relay, one of the finest products out there for them is the S1-024-27521-000 by York.

The S1-024-27521-000 is a power relay that connects out of the box to the wire, and at the end of the wire it will connect to another switch. It has 4 wires on it used to be able to run on power.

If your equipment requires a power relay then the S1-024-27521-000 is what you need for your home or commercial appliances. This product can be used on a range of applications. If you have had a similar product installed in the past, make sure that this one can be substituted.

The York S1-024-27421-000 - 25 Amp, 2 Pole, Single Throw, Power Relay is a relay with a molded case. It includes a 10/32 thread mounting hole and a 0.5 A to 30 A current setting range. The isolation voltage is 1000 VAC/VDC.