York S1-025-25907-700 "5"" FAN & LIMIT 120/240V" "5"" FAN & LIMIT 120/240V"

"5"" FAN & LIMIT 120/240V"

Federal Signal'S YORTH S1-025-25907-700 "5"" FAN & LIMIT 120/240V" is a 5" Commercial Flat Fan with Limit Switch. It has a 1/2 HP, 208/230/460 volt, 50/60 cycle motor and a 6700 CFM. This fan has galvanized steel guards with plastic blades and a fan only limit of 68 degrees F.

The York 5 inch fan and limit switch in a 120/240V configuration is designed to sense the temperature of an air stream and then limit it by turning off the heating element. The fan limit device is designed to protect the electric heater from overheating and being damaged by excessive temperature build up.

The YORK S1-025-25907-700 is designed as a cooling/heating kit with an optional 5"" Hydronic Fan. With a fully modulating output, this unit can be operated on either 120V or 240V current. This unit is also equipped with a contactor and pressure switch.

60 Watt, 120/240 VAC, 0.59 A, DUAL-FAN STANDARD (TWIN) MOTOR For use in York and Air King Air Conditioners. Limited 5 Year Warranty

The S1 is a fully programmable, self-contained temperature controller that includes a fan and limit control.  The unit is designed to operate electric heating tape, electric heat tape or cable. The S1-025-25907-700 must be hard wired after installation and the end user must be able to interpret their system's requirements and properly complete the wiring &/or installation of this unit.

Two speed fan can be used as a cooling fan to cool the condenser motor or as a recirculating fan. Two independent lower power limit controls can be set for both indoor and outdoor unit operation.

The YORK S1 series fan control achieves a new level of control and performance. It offers precise temperature adjustment, infrared sensing technology and superior circuitry to optimize the operation of space heaters, conveyor heaters, radiant heaters and other heating equipment.