York S1-025-26392-002 SPST A/R RolloutSw

SPST A/R RolloutSw

York's SPST A/R RolloutSw series of SPDT heavy-duty switches are designed for use in environments that require pushbutton control. Polycarbonate groups with stainless steel covers available.

Millions of outlets in thousands of applications need to be controlled—automatically. The SPST A/R RolloutSwitch is one of the most versatile control devices around and the best choice for residential and light commercial use.

When you're short on space, choose the York S1-025-26392-002 SPST A/R Rolloutsw. It fits neatly and out of the way, and it's small enough to take up little floor space. The Swivel Latch Type means you don't have to worry about locking mechanisms -- simply open it and pull it out! This model has a maximum temperature sensing device, which automatically turns the compressor off when the temperature exceeds 77 degrees Fahrenheit (25 degrees Celsius).

This air release rolloutsw has a single pole, 2 position, 1/4" NPT A/R swivel butterfly valve used primarily on flat sheet stainless steel rolloutsw.

The S1-025 Switches are SPST, A/R with roller lever actuators, 26/26 C terminals. The design is Steel with red hard plastic ends. These are normally open switches. The A/R designation means that the coil has a silver alloy contact ring which is silver plated copper alloy. The term "Alloy" refers to the fact that the coil form contacts are actually made from several metals combined together to achieve specific properties of conductivity, resiliency and surface finish.

The York S1-025-26392-002 is a SPST A/R double pole single throw toggle switch. It is made of sheet metal and has a plastic knob that has a clear (0%) marking and a red (100%) marking. This durable switch comes with a mounting nut and two washers for security and durability. This switch is used in commercial and residential applications.

The S1 Series, a stylish and elegant 15 amp electronic circuit breaker switches is designed for applications where you want to control power or current flow to a load from an input side. This specific single pole double throw switch features a SPST A/R lever contact and internal resettable polyswitch. The internal polyswitch limits the starting current of the electromagnetic coil to 15 amps. The internal overload protection within the S1 series stops the switch from being overloaded should other electrical equipment be added to an already loaded circuit.