York S1-025-46852-000 033 1100 CWEOS 230-1 MTR COND

033 1100 CWEOS 230-1 MTR COND

The York S1-025-46852-000 033 1100 CWEOS 230-1 MTR COND is the plumbing hardware you are searching for. The billy is produced by York . It's 1.25"H x 4.968"L x 2.2582"W and it has got a weight of 0.2 lbs . The best deal for this billy is $159.660 . The wrench consists of copper and copper construction .

The YORK 033 1100 CWEOS 230-1 MTR COND is a Single Bearing Strut Assembly. This product is the strut only. It does not include brackets or Spacers.

The YORK S1-025-46852-000 033 1100 CWEOS 230-1 MTR COND EcoBoost model features a rating of 100 amp continuous, 125 amp peak to ensure you can handle any type of job. A large 30 cubic foot capacity provides 10% more storage than the competition, while the CSA design allows for 11.5 amps of electrical usage, which is up to 29% less than other brands with similar motors.

The S1-025-46852-000 meets CWEOS230-1 specifications for an electric pole type air conditioner. The unit has maximum cooling capacity of 33.4kW (55.4A). This includes 4kw(5.5A) at 30F rise, 3.2kw(4.8A) at 20F rise and 4kw(5.5A) at a 10F rise. The maximum heating capacity is 28kW (40A). This includes 1.7kW(2.8A) at 40F fall, 1.7Kw(

This Heavy Duty Condenser is located in Yorkeys Knob. It is 895 metres tall and requires a climb of 200 metres. This Condenser was built in 2010 and was designed by WD Engineers Pty Ltd .

Close-center, permanent magnet motor. 1 hp, 230/460 volts, 4 pole. 3 phase. Open drip proof type cooling. Totally enclosed fan cooled. 230 volt single phase (for Europe), 208-230/460 volt 3 phase. Continuous duty - overload protection via tachogenerator set at maximum 60 deg C rise in temperature of stator winding and switch contacts remain open to disengage motor if tripped in overload condition. Includes leg kits as shown below.

York is a designer, manufacturer and supplier of air-cooled condensing gas fired units. The dampers on the unit can be field adjusted to 5 different positions thus enabling the owner to control the amount of outdoor air to heat input ratio. The heat exchanger provides fast cooling times, blockage free operation is assured through the water cooled automatic drain pans. The condenser fan delivers efficient and rapid pull-down of the furnace temperature.

The High Lift system lifts water up to 30 feet high without any adjustment needed, allowing you to clean more vertical surfaces.

Pump control is our core competence that has enabled us to offer a wide range of valves and controls. The extensive range includes shock absorbers, gas and liquid solenoids, butterfly valves, pressure and flow switches for industrial applications in many sectors such as oil, gas, petrochemical, chemical & process engineering.