CALEFFI 115117 24-Volt Z-One Normally Closed Valve Actuator without End Switch NC by.

24V Zone Valve Actuator without mic

000-000 000-000 C/W End Switch 24V Zone Valve Actuator without mic

The CALEFFI 115117 24-V Zone Valve Actuator without mic provides a normally closed valve actuator for use with Z-One Series and XB1-XL111 walls, panels, and accessories. The required electrical connection is provided in the form of an external driver (included) that can be wired to any load type or switch. The driver is designed to permit the electrical control of several valves, resistors and/or other drive modules connected in parallel up to a

With no electrical connections and only one wire, this 24-V zone valve actuator from Caleffi offers advantages over conventional 3-wire normally open actuators. The Z-One™ allows installation to a single point with a single wire connection between the Actuator and the zone box. This reduces labor requirements associated with system installation and eliminates possible leaking points in the scaffolding. Although the Z-One™ uses 24-Vac power for activation of the two valves it is not limited

The Caleffi 115117 24-Volt Zone Valve Actuator without End Switch does not have a built-in limit switch. Instead, this component is used to control the zone valves independently of each other and provide programmable zone control. This actuator works best with Caleffi products but can work with any pool equipment as long as it is run off 24 volt power.

Featuring pressure operated normally closed zone valves, the Caleffi 115117 24-Volt Z-One Normally Closed Valve Actuator without End Switch NC is a compact, maintenance free actuator that has no contacts, supports or connections required inside the panel board.

This Caleffi Z-One actuator is a normally open valve solenoid for 24 volt AC power without end switch. This unit fits zone valves that are manually opened or closed by a safety control system, and will provide on/off control of zones for automatic irrigation or other pneumatic switches. It provides three times the stroke capacity in length compared to a standard valve, has 24 VDC coil, is self contained, requires no connection to load, and is field reversible .

Our 115117 normally closed valve actuator is designed to actuate a zone valve normally open or off. The actuator features a 2 amp coil and a 1/2? NM-B14 junction box with metal enclosure for mounting to the enclosure. Non-metallic enclosure is optional.