Honeywell VR8200H1236 1/2 X 1/2 24V SLOW OPEN

1/2 X 1/2 24V SLOW OPEN

This motor has a J-box mount design. It requires minimal box volume for a variety of applications, including belts, push/pull cables, moving chains and many other areas where raising or lowering loads is required. The VR8200H1234 1/2 X 1/2 24V SLOW OPEN Motor can be used in an open or enclosed system. The VS8200J series is recommended for models that will be used in an open air system.

The VR8200H1236 1/2 x 1/2 24V Slow Open V-Grid with EZ Set, Lighted Fingers, Stainless Steel Cover is suitable for mounting on light applications to give a professional look to any lighting fixture. This vandal-resistant grid works easily with all existing 3-Way fan switches with a neutral wire or dimmer. Each unit starts at 60W and can be used in walkways, hallways, and the storage room of the garage. The sloped design of this grid allows light to shine down without glare that is typical in other grids. This item is UL L

The VR8200H1236 1/2" X 1/2" 24V SLOW OPEN, Cylindrical Valve Operator, Permanent Magnet, Double-Direction Control with Auxiliary Handwheel is a Two-Directional Part Operated Valves plus an Auxiliary Handwheel for Slow Opening Operation. It includes Entry Side Port with O-ring Seal and the Plug Side Port with a 2 Piece Elastomer Seal. It is designed For Use With VITON Seal. Refer to the Catalog / eCatalog for description of other part numbers, features and benefits.

Honeywell VR8200H1236 1/2"X1/2" 24V SLOW OPEN Door Operator Kit

The Honeywell VR8200H1236 1/2" X 1/2" 24V SLOW OPEN actuator is a pneumatic actuating cylinder that delivers precise control and positioning of a gate or door under heavy overhead bias conditions. This model is designed for continuous cycles of use and has an automatic electric gear drive in addition to its energy saving hydraulic operation. [Product Details...]

The Honeywell VR8200H1236 24V SLOW OPEN Valve has a square body, single port, and is contact design - maximum flow is 1.1 gpm @ 10 psi. It is Not recommended to be used for sprinkler systems or applications requiring precise flow rates. This valve is suitable for potable water applications that require 24 V automotive-style solenoid valves, where a slow opening/closing feature is not required.

The SLOW OPEN fuse can be used in place of a standard fuse to slow the normal fast-opening action of circuit breakers. The slow open time is approximately 0.5 seconds, compared to 0.1 seconds for a standard fuse. Perfect for motor circuits, this unique fuse will increase motor life and prevent blown fuses that often result from short circuit situations.