Milton Industries MIL614-4 Milton S- 1/4" Drain Cock

1/4" Drain Cock

Our S- Series 1/4" Drain Cock features an ergonomic design that has high-impact strength and corrosion resistance. This Milton Industries product is available in multiple configurations, capacities, and materials of construction."

The Milton Industries MIL614-4 1/4" Drain Cock is a threaded 1/4" irrigation cock that provides you with a quick and easy way to add a valve to your water system. With this cock, you can easily turn off your water supply. The Milton Industries MIL614-4 is designed to be used with PVC pipe systems and other various 1/4" tubing. It comes in an attractive brass finish to match the pipes you will use it with. This 1/4" male slip x male thread slip cock is made of brass for strength and durability.

The Milton Industries MIL614-4 is a 1/4" Drain Cock that has a standard capacity of 1/2" NPT. It is designed for easy installation in both residential and commercial water lines. The Milton Industries MIL614-4 operates at a maximum temperature of 200°F and a pressure of 150 psi. It has a flow rate of 0.25 gpm at 90°F, and it comes with a matte finish.

Milton Industries MIL614-4 1/4" Drain Cock is made of PVC with a metal spud and meets standardized SAE, NSF and UPC standards.

Milton Industries MIL614-4 Milton S- 1/4" Drain Cock is used for various water applications that include extensive chemical exposure. It has 1/4" female pipe threads with 1/2" male pipe threads.

When 1/4" drain fittings were first used, all were brass and no longer made today. The Milton S- 1/4" replacement for this discontinued product is the only such drain cock on the market today. This sturdy stainless steel product can withstand high pressures and temperatures and should contribute to a long service life. From Milton Industries, the inventor of the 1/4" Teflon® drain fitting first introduced into the plastics industry in 1945. The MIL614-4 should prove useful for those who run across 1/4" Schraeder taps.

Keep full control of waste water flow with this Milton Industries S- 1/4" Drain Cock. Designed for use with drain lines, this Milton Industries accessory will help you to get the most out of your various plumbing systems.

The Milton Industries MIL614-4 S-1/4 Drain Cock is a 1/4" drain cock that helps prevent backflow into the drain from a faucet. The metal construction helps prevent corrosion while the brass screw mount helps you tighten this drain by hand. This fitting works with a variety of Milton Industries supply lines and is easy to install, making it a great part for replacing old parts or installing a new sink in your home.

The MIL614-4 Milton S-1/4" Drain Cock features a 3/4" male thread, and is used to provide a valve in the waste line of drainage systems.

The S-1/4" Drain Cock by Milton is ideal for those smaller projects that don't need the power of the MIL-614. This model has a maximum flow rate of 1 GPM and a minimum flow rate of 0.5 GPM. Its flow control features a quarter turn ball valve and an integrated pipe wrench to keep it from slipping under pressure. For ease of installation, it includes a Viton elastomer gasket and is designed with an all brass body. The Milton Industries MIL614-4 Milton S- 1/4" Drain Cock is NSF approved for commercial use.

The MIL-614-4 Stem is an electroerosioner flow control drain cock that controls flow through the elimination of oxidizing chemical erosion. It consists of a manually operated brass hexagon stem mea...

A 1/4 inch (MIL-B-83781) cast brass body with chlorinated polypropylene (CPP) insert. CPP has outstanding resistance to hydraulic fluids and solvents, as well as hot water, steam, and acids. The Milton S-Series accessories are suitable for use with low pressure (up to 15 PSIG at 90°F (32°C)) fluid service up to 200°F (93°C).