B&G CTS-7524 3/4^ COMFORT-TROL VALVE 109017
Comes with one (1) Used B&G CTS-7524 3/4^ COMFORT-TROL VALVE 109017 that may have been in storage that will be sold as is.
B&G CTS-7524 3/4^ COMFORT-TROL VALVE 109017
The B&G CTS-7524 3/4? Comfort-trol Valve 109017 is a great addition to your existing plumbing system. It aids in controlling the water temperature in your home.
Packaged to protect the float, union and its gasket in this plastic bag, the Comfort-Trol relief valve is designed to provide continuous and reliable relief for hot water pressures up to 120 PSIG. The B&G CTS-7524 3/4^ Comfort-Trol relief valve is a flush mounted, electrically operated, in-line relief valve with electric heating coil and NEMA 1 enclosure [X], non-intrusive temperature sensor with 4
The B&G CTS-7524 Comfort-Trol valve is designed to automatically maintain a constant flow of water at a selected rate. This valve may be installed manually or factory integrated with the flow control section of most existing pumps. The CTS-7524 incorporates all of the desirable features of B&G's Comfort-Trol line to deliver quality and ease of operation for many applications.
The B and G CTS-7524 3/4 right angle thermostatic valve is suitable for hot water applications up to 125 psi at the relief setting. Reverse acting 3/4 inlet x 1/2 turn stop valve features a chrome bonnet and middle port that provides a means for draining. The body incorporates a special sealing washer that ensures positive sealing against leakage. The spool is manufactured from case hardened steel, and the plug is automatically lubricated via permanent oil groves. The single handle assembly incorporates an anti-codling device to ensure smooth operation under pressure while also providing enhanced safety in the event
The COMFORT-TROL features a small, durable diaphragm that lies across the discharge opening at the bottom of the valve body. This finger-like device remains full of water pressure without having any direct positive lift. The resulting lift is transferred through a piston and rod assembly to open the gate valve. With this design, there is less stress on the diaphragm when lifting media above the diaphragm line is required, resulting in better life.