Honeywell AT87A1056 120/208/240V 48VA FOOT MT TRAN

120/208/240V 48VA FOOT MT TRAN

The Honeywell AT87A1056 120/208/240V 48VA FOOT MT TRAN is a device that controls the supply of electric current to another device or group of devices. The AT87A1200 can be used with motors, relays, solenoids and switches. It uses full voltage control which gives you the ability to set the exact voltage that you want it to output.

Never worry about stopping or going dark again with the Honeywell AT87A1056 120/208/240V 48VA Foot Mounted Transformer 3 Phase.

Our foot-mountable transformer is ideal for use with electronic equipment. It provides a 120 V@ 3 Amps, 208 V@ 3 Amps and 240 V@ 1 Amp outputs. The high efficiency design produces minimal heat at low load levels. A manual wire twist-lock system provides easy connections to primary conductor. This design also facilitates the stress relief of wires into the terminal blocks.

The AT87A1056 is an isolated, space-saving transformer for use with most of the Honeywell 8000 series instruments. Equipped with a NEMA L14-30 plug, the AT87A1056 operates on 120/208/240 VAC RMS single phase or 208/240 VAC RMS three phase power and transfers 48 VA to 1000 VA of load current. It provides a secondary isolation barrier for hazardous voltages to keep users safe.

Desk-top AT87A1056 isolated transformer converts 120/208/240 V AC to 48 V AC with a maximum output of 47.2 VA. This transformer is ideally suited for operations that require isolation. The unit accepts 60 Hz while the input voltage range is 88-133 VAC.

The AT87A1056 Foot Mount Transfer Switch is used with an existing standby generator to provide temporary power in the event of a utility power failure. In addition, the switch allows the installation of a new generator to power your home's electrical loads (lights, heating/cooling equipment) during prolonged outages, or at any time.

The AT87A1056 is a portable and transportable generator Transformer that can be used with the AT87A1062 power pack. The AT87A1062 power pack utilizes the 120/208/240V 50/60HZ† dry-type transformer to produce 20AMP , 208/240V, 60Hz† output voltage for operation of electrical equipment. The AT87A0663 Charger is also required when using this product.