ROBERTSHAW 15252 Gas Cooking Electromagnet Replacementace Kit, K

MAGNETIC SAFETY HEAD FOR USE WITH 1

Robert Shaw Vibrasswitch 366-A2

A (1) phase vibration switch for residential and commercial water heater applications

This is accomplished by using one diaphragm to sense pressure and a second diaphragm to actuate the valves

A highly responsive valve positioner is provided which directly translates the low frequency vibration of the motor into high frequency valve movement

The Vibraswitch can be used to switch any load up to 6 Amps at 30VDC or 24VDC

VIBRASWITCH 366-A2 - 6000-002 - Robertshaw 20076

The steel enclosure allows the VIBRASWITCH® 366-A2 to perform in these difficult operating conditions

When activated, the VIBRASWITCH 366-A2 will trip, thus shutting down power to the water heater pilot assembly, in which case ignition will not occur

O

Features a low-profile slide switch and provides easy access to the modular terminal block

MetroPac is an authorized distributor of Robertshaw brand products

This is commonly referred to as a “Knock-Off” switch

The VIBRASWITCH® 366-A2 is an electronic vibration switch that provides accurate and reliable industrial control in harsh environments, including severe shock, vibration and dust

The robust design features an open frame to accommodate custom mounting methods

The VIBRASWITCH 366-A2 is designed to be mounted on the hot water heater tank wall and controlled by an external vibration switch or device

5A, 120VAC, 60Hz

Robertshaw VIBRASWITCH VAV units provide air pressure differential zoning in a single packaged unit

It has a durable, heavy-duty motor that operates at 5,000 rpm

This 1/2 HP Vibratory Motor (Model 366-A2) has adjustable vibrations and is ideal for a wide range of commercial uses

Designed to control intermittent loads where an exacting control of power is not required

0

, normally open, solid state contact

The flexible natural rubber diaphragms ensure long life and trouble-free operation for high cycle applications

High accuracy sensing is accomplished by an integral bellows which forms an airtight seal against the shaft of a dedicated vibratory motor

Vibraswitch 366-A2 20076 6000-002 - style 362 (120/208VAC), 4 pole, 3 wire, N