ROBERTSHAW 6533 JUNCTION BLOCK ADAPTER

JUNCTION BLOCK ADAPTER

The versatile Robertshaw 6533 Junction Block Adapter can be used for many different applications

The brand new Robertshaw 6533 Junction Block Adapter resolves problems with old or damaged junction boxes where the wires have been spliced together

The adapter is lead-free

Offering an economical solution for retrofitting existing installations

The Robertshaw 6533 is a plastic junction box adapter for use with Robertshaw Controls 6532 and 6545 junction boxes

The 6533 is a junction box adapter and will allow you to connect your appliance control wires directly to the switch or motor, it has a one quarter half inch compression type fitting on both ends and it's made of PVC plastic, this part number is 671593-00

The adapter is designed to allow electrical connection between the front of the junction box and an external water pipe

The Robertshaw 6533 Junction Block Adapter is designed to provide a means of connecting a refrigerant line with pipe thread connections to a 1/8" NPT connection on the supply side of a copper-in, copper-out valve

The product works with a temperature range of -20 degrees celsius to 50 degrees celsius

This adapter is a block type adapter

Use the Robertshaw 6533 Junction Block Adapter to change a single terminal junction box into a double terminal junction box

This is an adapter from Robertshaw part number 6533

It has a pressure release device

Whether it is used to connect a gas valve to the gas line, a water inlet to the water line, or any number of other possible applications, this adapter gets the job done

This connection is required for many projects and is extremely useful

This adapter enables you to install a new J-box without having to replace all of the wires leading into it

Used with the Robertshaw RF-B8310, RF-B8305, RF-B8307 and RF-E8305 thermostats and the Robertshaw RJD series of relays

It will connect to the copper-in port on the valve and allows the refrigerant line to be connected to the copper out port on the valve

This junction block adapter is made of stainless steel

The Robertshaw 6533 is a junction box adapter to be used in conjunction with the Robertshaw 6530 or 6531 Junction Boxes

This part will convert any 3/4 inch threaded connection to a junction box

Designed for the professional installer, this Junction Box Adapter allows service to be run from the terminal block side of the heat pump