WHITE-RODGERS 5035 ELECTRIC HEAT SEQUENCER 2 SWITCH

ELECTRIC HEAT SEQUENCER 2 SWITCH

The 5035 is a 3-way electrically timed heat sequencer switch with 2 on/off settings per cycle. It has a maximum rating of 120 volts, 60 hertz and 20 amps. This sequencer feature provides the convenience of programming automatic heating and cooling cycles into one convenient switch. The 5035 is suitable for use with baseboard radiant heaters, fireplaces, wall furnaces and gas or oil water heaters that are hardwired to electrical junction boxes.

WHITE-RODGERS 5035 ELECTRIC HEAT SEQUENCER 2 SWITCH The WHITE-RODGERS 5035 Electrically Controlled Heat Sequencer is a solid-state device that controls up to two heating stages for electrically heated appliances, such as baseboard heaters and heat pumps. The 5035 features both a time delay and adjustable temperature limitation. It has an integrated single pole double throw switch, but can be easily interfaced with existing low voltage control circuits by use of a simple mechanical timer or solid-state relay.

The White-Rodgers 5035 Electric Heat Sequencer 2 Switch is a mechanical, temperature time control that regulates electric heaters and convectors. It controls two stages of heating and one of cooling. The electric heat sequencer will start the first stage of heating at the preset temperature (with a minimum on/off delay to prevent cycling). When the set point is reached, it will switch to the second stage. When this second stage has reached its set point (with a minimum on/off delay), it will switch to cooling if desired.

WHITE-RODGERS 5035 ELECTRIC HEAT SEQUENCER 2 SWITCH. 5035 - White Rodgers Controls. Electric Heat Sequencer / 2 Switch, Box with Label and Instructions. This unit is used with thermostats that are compatible with electric heat switches.

The White-Rodgers 5035 two-stage electric heat sequencer switch works with two heating devices to maintain a comfortable temperature in rooms that need a little more heat. The 5035 is great for larger homes, commercial spaces and other locations with multiple temperature zones. This unit can be used to turn on COOLING equipment or VENTILATION equipment during the HEATING cycle of a PROGRAMMING CONTROL DEVICE.

WHITE-RODGERS 5035 ELECTRIC HEAT SEQUENCER 2 SWITCH — This device is used to control two separate heating circuits. It is typically used to control electric baseboard heaters, but has other uses as well. For example, it can also be used to control a gas furnace if the gas valve can be connected directly to the device.

Control your electric heat easily with the White-Rodgers 5035 Electric Heat Sequencer 2 Switch. This two-switch electric heat sequencer is perfect for controlling your baseboard, radiant, or panel heaters. You set it to the desired temperature and it will turn on when you need it to. When the room reaches that temperature, it will turn off—saving you energy costs by using your heater only when needed.

White-Rodgers 5035 Electric Heat Sequencer 2 Switch is a two-speed sequenced switch for electric heaters designed for use with any brand of thermostat. It is used when heat need not be maintained at the same level throughout the entire heating season. This unit has an adjustable dead band and a minimum on time of 10 minutes.

The White-Rodgers 5035 is a programmable Heat Sequencer 2 Switch that allows you to control a 2 stage heating schedule. The first stage has been preprogrammed and the second can be programmed to meet your needs.

SWITCH, SEQUENCER 2, 50A, 30/60 MIN.