356904Z KEY PAD RELOCATION KIT FOR 011055 PUMP

KEY PAD RELOCATION KIT

This Key Pad Relocation Kit for 011055 Pump is made of galvanized steel.

The Aqua Group 356904Z Key Pad Relocation Kit for 011055 Pump is a black plastic kit that includes 2 key pad brackets and two screws to relocate key pad; the original mounting holes are not used.

The Key Pad Relocation Kit allows the user to relocate the Key Pad from side-by-side or top-by-top to a new position on the front bezel of the pump. Includes placard that is to be used as a reminder for replacing the key pad correctly.

Aqua Group's Keypad Relocation Kit for the 011055 Pump relocates the keypad to a convenient location above the water reservoir, eliminating the need to bend over or hunch down. This kit includes an adjustable mounting bracket that can be easily attached to the side of the reservoir, a pre-wired 4 button keypad & waterproof membrane switch, 8 ft. of wire wrap wire & mounting hardware.

The Keypad Relocation Kit provides the ability to relocate the keypad to several locations on the United Aqua group 011055 pump. It can be mounted by drilling 1/8" holes in the desired location, or using tie-wraps. This relocation can be used for sight-line applications where the keypad sight line is obstructed.

This key pad relocation kit for your 011055 pump is specifically designed to be used with the 011055 pump. Please make sure item numbers match. This kit will relocate your key pad onto the side of your pool cabinet, allowing you to utilize it while standing inside/outside the pool enclosure.

The Aqua Group Keypad Relocation kit allows you to move your AquaKeypads™ to a new location on the pool wall. The kit has mounting hardware and brackets to move one AquaKeypad™ from its original location of installation.

Our Plug-n-Play Kit allows you to easily move your key pad from the 18ga cabinet under the deck to any flat surface that is desired. This kit includes an AC power cord, 4 screws w/nuts for mounting the new play pad enclosure under the deck, 2 washers for attaching the key pad to the mounting plate, and 2 PVC pipes of various lengths with 'L' brackets for use under the deck to provide stability of the relocated key pad.

United Aqua Group has researched the most effective methods for extending pump life in your pool or spa. Our keypad relocation kit was designed to reduce water splashing on top of the keypad area under normal operating conditions. It is able to reduce operating costs by up to 6%.

This kit relocates the keypad on Aquaus 356904Z to make it accessible. The Keypad can be lifted off of the front cover (2 bonding screws) and attached to the side of the pump (2 plastic support tabs, with velcro backing).

Attach this kit to your AquaSource pump and move the keypad away from the water for convenient operation.

Accommodates a variety of Aquatec® overflow boxes and Universal Pump Panel. Universal pump panel is required for use with all other Profile® Series products.