WHITE-RODGERS 78525 210°F Open - 170°F Close Board Mount 1/2" Bimetal Disc Lim, N/A.

BOARD MOUNT LIMIT CONTROL OPENS AT

White-Rodgers 78525 210°F Open - 170°F Close Board Mount 1/2" Bimetal Disc Limiter.

BOARD MOUNT LIMIT CONTROL

White-Rodgers 78525 210°F Open - 170°F Close Board Mount 1/2" Bimetal Disc Limiter features a silver metallic finish. This product is designed for use on gas, oil and LPG appliances and it is perfect for residential applications. It is also recognized for compliance with the Americans with Disabilities Act (ADA) . This limit control is made in the U.S.A. and it has a manufacturer warranty of three years limited on parts and labor.

The White-Rodgers 78525 210°F Open - 170°F Close Board Mount 1/2" Bimetal Disc Limiting Device is a limit control that opens at 210°F and closes at 170°F for single stage heating systems.

This product is a brand new White-Rodgers [brand] 78525 210 degrees F open 170 degrees F close bimetal limit control. It's part of the White-Rodgers [brand] 5000 Series [number]. This product is designed to fit in a 1/2" board opening. This limit control has a 2.5" (63.5mm) bushing, 1/2" (12.7mm) hole and 1/4" (6.4mm) knockout for mounting screws are included with this product.

White-Rodgers 78525 Limit Control is a board mount bimetal disc limiter. The limit control opens at 210°F. This product is designed for use in boilers, furnaces and other enclosed combustion equipment that require periodic limit control and resetting due to cycling loads. The White-Rodgers 78525 Limit Control operates on 115/120 volts AC, 1/2 horsepower.

This product is designed for residential applications where a low temperature limit control is desired. The 78525 has a white thermoplastic cover and yellow bimetal disc. Its 1/2" size makes it suitable for installation on a standard single-pole breaker or switch. It has a ¼"-20 tapped hole in the top of the case for mounting with #6-32 screws.

The 78525 has a limit temperature range of 100°F to 210°F and will open at 170°F. It is normally closed and will open at a preset temperature. The control has a 10-3/4" length of wire and provides a 1/2" mounting hole. Limit controls are also referred to as setback controls or safety controls and are used to prevent equipment or systems from being damaged by excessive temperatures or pressures.

The White-Rodgers 78525 210°F Open - 170°F Close Board Mount 1/2" Bimetal Disc Limiter is a qualified product, meaning it has a 25% or greater energy savings potential for the Water Heating application. It can also be used for the Ventilation application.

This product is a board limit control that opens at 210°F (99°C) and closes at 170°F (77°C). It is a 1/2 inch bimetal disc limiter, with a 13/16 inch square mounting flange, and a 1/4 inch terminal. It has an open-close disc configuration. The 78525 is rated 2P 200A 250VAC, 2P 125VAC, and single pole 20A 125V/250VAC The 78525 is an alternate replacement for the White Rodgers MDL78522.