DeWalt DWTDW8308 4-1/2-Inches x 7/8-Inches 60 Grit Zirconia Angle Grinder Flap Disc

4.5"x7/8" 60gt Zirc T29 Flap D

The DeWalt DWTDW8308 4.5"x7/8" 60grit Zirc T29 Flap Discs are designed to fit the DeWalt Angle Grinder which is ideal for metalworking or use in heavy industrial applications where aggressive surface preparation is required.

The DeWalt 4-1/2"-inch by 7/8"-inch 60-grit Zirconia angle grinder flap disc is designed to withstand the hard hitting action in a production shop. Flap discs are commonly used for cleanup or removal of weld splatter. The polycrystalline diamond grinding wheel on this flap disc is engineered with chamfered leading edge to effectively eliminate weld splatter without gouging the work surface. It is made of premium grade zirconia ceramic material which produces longer tool life and results in superior cutting performance. This composition also means there's less risk of

The DeWalt DWTDW8308 4-1/2-Inches x 7/8-Inches 60 Grit Zirconia Angle Grinder Flap Disc isn't your typical flap disc. This flap disc is made with zirconia and a tough fiber backing, giving it superior strength and flexibility for grinding.

The DeWalt DWTDW8308 4-1/2-Inches x 7/8-Inches 60 Grit Zirconia Angle Grinder Flap Disc stays sharper, grinds faster, runs cooler, and lasts longer. This 60-grit disc is designed to cut aggressively and last longer with no load-dependent run out.

60 Grit Zirconia Flap Disc is designed for severe grinding applications. These zirconia flap discs are ideal for removing hard concrete or asphalt surfaces. Its aggressive cutting and quick restorative action provide a higher level of performance than the conventional aluminum oxide flap discs. Used at high RPMs, they produce fast surface removal with minimal vibration. The T29 flaps will outlast 5 typical grit flap discs.

DW8308 4-1/2 x 7/8 60 Grit Zirconia Angle Grinder Flap Disc, For use with Angle grinders with speed range of 10,000 to 20,000 RPM, Wear resistant matrix grain bond design, 4 1/2" x 7/8" inch Diameter

The D28400Z 60G Flap Disc is a 4.5" x 7/8" (114 x 22 mm) grinding disc that is designed for metal shaping, contour and finishing. The grinding surface includes shock resistant ZrO ceramic particles designed to eliminate chipping and provide excellent longevity. This disc leaves a very smooth finish on castings, which improves paintability and prevents rusting. The 60G grade can also be used as a pre-grinder.