ROBERTSHAW 41-410 41-410 HOT SURFACE FURNACE IGNITOR-4-1/2"

HOT SURFACE FURNACE IGNITOR-4-1/2"

This Robertshaw 41-410 4 1/2" Hot Surface Furnace Ignitor is designed to replace and upgrade your current equipment. It features high quality construction with dependable electrical contacts for long lasting, efficient use.

This ignitor is used on all models of hot surface furnaces having a 3/8-inch (9.53mm) or larger burner ports such as: Art, Art II, Plasco, Ideal-Gas and Hot Head Furnaces..

The Robertshaw 41-410 Hot Surface Furnace Ignitor includes four-foot leads and requires an in-wall junction box for installation. This ignitor will operate up to 1,000 amps and is constructed using a porcelain steel housing with copper windings, and it is 2.5 amps and 120/240 volts. The 41-410 ignitor has a 90 day limited warranty against defects in material or workmanship when used under normal conditions.

Robertshaw Ignitor is designed for starting direct-view or radiant tube type hot surface furnaces. When electrically energized, this electronic ignitor glows red; when the furnace is lit, this ignitor will turn off automatically just prior to a flame reaching the ignitor (indicating safe ignition). An audible click will also be heard at this time.

The Robertshaw 41-410 surface furnace ignitor is used to ignite a vapor circuit between the liquid line and the pilot of a gravity-type oil burner. It will ignite gas or propane under pressures up to 30 psig (2.1 bar). It has a 36" lead wire and an 18 gauge AWG, 14-1/2" overall body length.

4-1/2'', 10,000 BTU Stainless Steel Hot Surface Heater with High Visibility Light and Enclosure. Features an adjustable thermostat for correct temperature setting, Snap-on cover for safety and easy installation.

The Robertshaw 41-410 is a boiler furnace ignitor consisting of a stainless steel rod, cast bronze cap and thermocouple. It is designed for use on electrically heated furnaces with cast iron heat exchanger tubes and boilers.