ROBERTSHAW 4488 HOT SURFACE FURNACE IGNITOR-5-1/4" HOT SURFACE FURNACE IGNITOR-5-1/4"

HOT SURFACE FURNACE IGNITOR-5-1/4"

Used with condensing units, furnaces and air conditioners found in residential or commercial installations

It features a Black/White/Red wire for power supply and a Black/Blue wire for the common or signal wire

It has a momentary contact on-off blade type switch and is DPST (double pole, single throw)

The Robertshaw 802 120/240/277V DPST Heat Only is used on heaters and boilers

The DPST has two separate poles and three contacts

This switch is rated at 120V and has an operating temperature of -40 to 158 degrees Fahrenheit (-40 to 70 degrees Celsius)

They are commonly used in applications such as electric baseboards, living room wall heaters, and radiant floor units

The Robertshaw 802 series of DPST heat-only switches is extremely reliable and hardworking

For more than 100 years, Robertshaw has been a leader in the development of innovative controls and instruments for HVAC/R applications

It is owned by the same parent company as the Neuco Inc

The amp rating for this stat is 10 amps at 120V and 20 amps at 277V, 24 VDC

This product can also be used for pumps, induction motors, single phase motors, and as a starter

The voltage is 120/277 volt AC controlled

It is a solid state device with a waterproof plastic casing

This is a 120V, 2-Pole, 3-Wire, Double-Throw (Break Before Make) Pressure Switch

The Robertshaw 802 series is a 120/277V heat only stat with brass and stainless steel construction

ROBERTSHAW 802 120/240/277V DPST HEAT ONLY

This product is designed to control heat only loads

Robertshaw 802 120/240/277V DPST HEAT ONLY

The Robertshaw Controls, Inc

It has a maximum temperature of 221F degrees at its 30 amp rating

The Robertshaw 802 120/240/277V DPST Heat Only is a heat-only device that will offer safe and reliable operation

The 802 120/240/277V DPST Heat Only comes with a manual reset button and power indicator light

This circuit features a 5/8" bolt hole and comes with gold-plated brass terminals that won't corrode or rust

This two wire heat switch operates one heating device and is factory set for 120V

It features a compact 1-1/2" x 1-1/2" size, 1/8" thick phenolic baseplate, rare earth magnet actuator and bakelite rocker

This device has been manufactured in compliance with UL, CSA, NEMA and National Electric codes

product line includes automatic temperature controls, air pressure switches, modulating gas valves, hydronic mixing valves and specialty control equipment

The patented self-cleaning feature maintains the resistance to corrosion found in all Robertshaw products

This brand has been around for a long time

This product is a typical example of their quality and durability