RHEEM 174033 Limit Switch - Auto Reset (Flanged

Limit Switch - Auto Reset (Flanged

The RHEEM Limit Switch - Auto Reset (Flanged 174033 provides cooling limit protection for solid-fuel and gas units. This product has a 17/32" square flange that provides simple replacement on already existing 19" x 31/32" panel boards.

RHEEM Limit Switches - Auto Reset.

Auto Reset Limit Switch with standard flange size. The sensor includes a built-in 10 amp self-resetting thermal switch, which will automatically reset an alarm if the temperature drops below the sensor setting.

A number of applications call for limit switches to be equipped with an auto-reset feature. This type of safety device is located at the rear of a machine and is used to trip a stop signal when the machine reaches a preset point. The auto-reset will trip at a preset distance from the stop point; however, after power is removed from the machine and reapplied, the switch will reset itself and be ready to operate again. Auto-reset features are also useful during maintenance or testing as they allow you to manually apply power to the stop point without having be concerned about setting off another machine that may be actively operating on

Restore your Rheem product to factory settings with this replacement limit switch. It's only compatible with products that have the flanged full-load contacts.

This Limit Switch mounts on the flange of a heat exchanger to activate an audible alarm and shut down the process in the event of failure of a safety or interlock device during normal system operation.

The automatic reset limit switch is for use on Rheem Tankless water heaters. It prevents user from using the heater when tank is full of water. It is hard wired into a heating system. It needs no power to operate, and it has a self-cleaning feature to help prevent the switch from going into an overload condition.