BRAEBURN 111752 24V/MILLIVOLT SINGLE STAGE HEAT ONLY MECHANICAL MERCURY FREE THERMOSTAT FOR CONVENTIONAL OR MILLIVOLT SYSTEMS, INCLUDES POSITIVE OFF 50-9

24V/MILLIVOLT SINGLE STAGE HEAT ONL

The BRAEBURN 111752 24V/MILLIVOLT SINGLE STAGE HEAT ONLY MECHANICAL MERCURY FREE THERMOSTAT FOR CONVENTIONAL OR MILLIVOLT SYSTEMS, INCLUDES POSITIVE OFF 50-9 controls the temperature of an electrical appliance. It is designed for residential, industrial and commercial applications. This thermostat is designed with a solid state quartz timer. It is powered by 110-120 voltage of alternating current.

For homes with 24V/Millivolt systems, a 24V/Millivolt single stage stat is needed to control heat and air conditioning. This 24v/millivolt heat on/off stat includes a 9” deep reset that can be used if the power goes out, without having to remove the cover and insert the manual over-ride key.

This is a 24V/Millivolt single stage heat on/off thermostat that becomes a positive off when installing in a conventional heating system.

The Braeburn 111752 24V/Millivolt single stage heat only mechanical thermostat with built in blocking diode. It has a positive Off status of 50F and a temperature range of 40 to 80F. Features two brass 1/4" mounting holes and comes with a five year warranty.

Our EX Series Millivolt Tstat has been tested by an independent laboratory to meet 200,000 cycles per NEMA MG1 standards. This tstat is for single stage heat only; it does not have a cooling function. It comes with a factory set 48V heat anticipator that will need to be adjusted (or updated) by a qualified service technician to control hot water baseboard heaters.

The Braeburn Single Stage Mechanical Thermostat for Conventional or Millivolt Systems has a higher limit trip that allows it to be used in conjunction with the boiler's safety valve. This can be used for applications such as the Vacuum Breaker System, Water Heater Tank Installation, Steam Heating and Multiple Building Applications.

A (1) Day Programmable Thermostat for 24 VAC systems - Millivolt systems. Our 24V Thermostats are designed to work with boilers, water heaters, baseboard electric heaters, electric fireplaces and other 24 VAC Heating systems. Programmable and compatible with mercury free systems