Solenoid, SPNO, 24 VDC Isolated Coi
White-Rodgers brand Solenoid, SPNO, 24 VDC Isolated Coil, Normally Open Continuous Contact Rating 200 Amps, Inrush 600 Amps (101776)
The White-Rodgers 101776 Solenoid, SPNO, 24 VDC Isolated Coil, Normally Open Continuous Contact Rating 200 Amps, Inrush 600 Amps works with every brand of 2-wire control system with isolated power. Typical applications include opening or closing dampers, valves and locks; deenergizing or energizi...
The SPNO 24 VDC Isolated Solenoid is a general purpose operating device that provides control over a wide variety of valves. The SPNO has a built-in time delay to permit operator intervention in case of fire. It is rated for continuous duty and has an isolation rating of 200A at 240 VAC, 800 A peak
The WHITE-RODGERS® 101776 WHI IRON™ SPNO 24 VDC Isolated Solenoid is used for white rodgers inflair packages such as the 8120 furnace and most geothermal systems.
The White-Rodgers 101776 24 VDC Solenoid is an Isolated Solenoid, normally open. This solenoid can be used in many applications, such as pump applications and circulating liquid applications. It has a continuous contact rating of 200 amps at 24 VDC, with an inrush current of 600 amps for opening. The coil has a terminal connection, and it is rated for 150 psig maximum pressure.
This 24-volt normally open solenoid has a continuous contact rating of 200 amps and an inrush rating of 600 amps beginning with 0.5 second initial rise time. Its coil is rated 24 volts DC, 7 milliamperes. This unit has a 4-1/2 x 2-inch maximum working space; 3/8-inch NPT female inlet and outlet ports; 2-1/2 x 1-1/4 inches overall length; 1/2-inch NPT male conduit inlet and outlet ports; and a maximum ambient temperature of 150 degrees C.
The Solenoid provides 24 VAC voltage and 600 Amps of current when switched ON. It switches OFF at any time if current flow is halted due to equipment failure or line interruption. It switches back ON rapidly after power is restored. Non-magnetic, diecast zinc body and encapsulated rare earth magnet pair in the magnetic switch.