WHITE-RODGERS 101776 White Rodgers Solenoid, SPNO, 24 VDC Isolated Coil, Normally Open Continuous Contact Rating 200 Amps, Inrush 600 Amps

Solenoid, SPNO, 24 VDC Isolated Coi

N/A

This standard normally open, 24 VDC, 200 amp solenoid is used to control water flow through a valve in a circuit. It features a continuous contact rating of 200 amps and an inrush current rating of 600 amps.

The White-Rodgers 101776 Solenoid, SPNO, 24 VDC Isolated Coil, Normally Open Continuous Contact Rating 200 Amps, Inrush 600 Amps product is an excellent example of the talent and knowledge that comes from our in-house design team. This electrically powered device is powered by 24 volts direct current and can hold an electrical load of 200 amps at 12 amps continuous. The solenoid was designed with an isolated coil to prevent electrocution if touched while in used.

This product is a direct replacement for the following discontinued White-Rodgers model: 101776.

The 101776 is a normally-open, 24 VDC Solenoid that features an isolated coil and normally open contacts, rated at 200 amps continuous duty. This device is designed for use with thermostats or other controlling devices and can be used in air conditioning and refrigeration equipment.

White-Rodgers 101776 White-Rodgers Solenoid, SPNO, 24 VDC Isolated Coil, Normally Open Continuous Contact Rating 200 Amps, Inrush 600 Amps. This product has been discontinued by the manufacturer.

The WHITE-RODGERS 101776 WHITE-RODGERS Solenoid, SPNO, 24 VDC Isolated Coil, Normally Open Continuous Contact Rating 200 Amps, Inrush 600 Amps is a type of solenoid that uses a magnetic field to open and close the contacts. The coil of wire is wrapped around an iron core. Current running through the coil creates the magnetic field and when power is removed from the circuit, the magnetism in the iron collapses and allows a strong spring to pull the contacts closed. This device can switch one or two wires from an AC source to a DC load up to 200 amps.

WHITE-RODGERS 101776 WHITE-RODGERS Solenoid, SPNO, 24 VDC Isolated Coil, Normally Open Continuous Contact Rating 200 Amps, Inrush 600 Amps Product Overview: The White-Rodgers 101776 normally open solenoid valve is used to control water flow from a water source to an irrigation system. The solenoid valve features a stainless steel body and bonnet for rust resistance and long life. It has an adjustable dial that allows for quick and easy on/off operation. It also comes with a manual reset overload protector that protects the solenoid under short circuits.

The WHITE-RODGERS 101776 is designed for use in applications where a normally open contact must be maintained at all times. The unit will provide power to the connected component when the control circuit is energized and de-energize it when the control circuit is de-energized. This unique type of switch can be used in many applications including fire alarms, pumps and many more.

The WHITE-RODGERS 101776 WHITE-RODGERS Solenoid provides a complete range of standard and specialized controls for both residential and commercial applications. These controls provide full flexibility for the homeowner or professional contractor who desires a "do it yourself" project. The controls are reliable, easy to install and maintain, and are available in voltages from 24 to 120 VAC or 120 to 230 VAC.