Nordyne 276995 626449R 225-250F AUTO Limit Switch

225-250F AUTO Limit Switch

The Nordyne 276995 626449R 225-250F AUTO Limit Switch is a safety device designed to monitor the temperature range of the equipment it is used with and shut down the circuit should a pre-set temperature be exceeded. The Nordic 275 is typically utilized in motors, controls, or other applications where an overload protection device is necessary.

The AUTO Limit Switch is designed to be used with a resistance temperature detector and is an industrial-grade, high-quality switch that operates at 240V/110V.

This fan limit switch is a safety feature that turns the blower motor off once the thermostat reaches 225-250F. It is a 72VDC control and has a blade terminal connection.

The AUTO switch turns off the cooker when it is on high and reaches 220F. This prevents auto ignition of LP gas and also protects the regulator by preventing "over reving" of the burner.

Our 275-watt limit switch is designed for use in 2 ton and 3 ton air conditioning equipment. This GIC product features a non-interchangeable, 24 VDC coil and a 3 wire lead (includes wire leads with set screws) plug.

A Limit Switch is a switch you can set once, and forget. It is automatically activated when a particular temperature is reached (the "r" in the model number means remote mounted). It has visible leads on one side of the sensor to connect to the wiring harness of the furnace and an alligator clamp on the other side of the sensor for attachment to a bare copper or aluminum wire leading to the control.

This 30-103/H/1A PRV Limit Switch is a replacement for Nordyne Heat Exchanger. It is a control component designed to stop or control the flow of fluids based on the position of a manually operated shaft mounted switch. The DC manual actuator in this circuit can be replaced with an optional PLC actuation system to give what many have called, "the smart switch". This manual switch acts as a normal limit switch when used with the included brass rod and linkage system