NORDYNE 632451R 632451R PRESSURE SWITCH 0.9M3c PRESSURE SWITCH 0.9M3c

".90""WC SPST Pressure Switch"

Eaton's Pressure Switch, 0.90""WC Spst, 200-250 VAC, 480 VAC, 50/60 Hz, 0.9 M3c, Module F (632451R)"

Pressure Switch, 0.90"" WC, SPST Pressure Switches

This is a replacement .90" WC Pressure Switch, as used in the following models of Nordyne 13HP engine-driven air compressors:

This pressure switch is factory programmed with the correct adjustment for compatibility with NORDYNE water coolers. The adjustment valve is located on the side and may need to be adjusted again after installation of the item.

Pressure Switch 0.9M3c. Pressure switches are designed to indicate pressure in a variety of applications. They fit conveniently onto low-voltage contacts and are intended for mounting in dash B or C panels. Use with pressure transducers to convert pressure into an analog signal that can be used to operate an alarm, control, or valves.

NORDYNE 632451R 632451R Thermofoil Bottom Mount Pressure Switches. These Pressure Switches feature NORDYNE's standard 3/8"" bsp threads, and are hermetically sealed with a Prima M A polypropylene diaphragm. NORDYNE Pressure Switches are non-adjustable, but have a setting range of 0-185 psi (0-1 bar) and an adjustable bonnet. Available with 1/2"" male hose ends for vertical mounting or with 1/2"" male NPT fittings for horizontal mounting.

The SW04 is an electrically operated pressure switch, designed to monitor the pressure of process fluids through a 0.9 m (3 ft) membrane. It is used to control the operation of machine tools, pneumatic and hydraulic systems and for many other purposes.