Honeywell 50048926-2-SINGLE 6PIN EDGE CONNECTOR, EACH

6PIN EDGE CONNECTOR, EACH

The 6PIN EDGE CONNECTOR, EACH is an assembly intended to be connected to an industry-standard modular cable in order to provide a DC signal to a peripheral device. The 6PIN EDGE CONNECTOR, EACH consists of a shell assembly that houses a spring-loaded metal contact, as well as a mating plug, designed to connect to an industry-standard mating socket interface, such as the 7178 Backplane Auxiliary System Interface (BASI).

These are single 6PIN EDGE CONNECTOR for use with EDGE® II 500 family and Edge Series Control Modules. These edge connectors are used during factory installation, serial field replacement or troubleshooting.

This is an EDGE connector with 6 receptacles - black bracket - single mating.

6-Pin, Single Family, EDGE connector 50048926-2. Connector Family Number: JYC-03; Color Code: Black; Master Contactor Rating: 10 amps @ 125/250 volts AC; Contact Resistance: 5.0 ohms max.; Voltage Rating DC Power (Lugs Only): 2000Vrms/min.

The 6 pin single connector for the X-10 home automation system.

The Honeywell 50048926-2 Single Edge Connector is a durable component designed for use with Honeywell's brand of smoke switches. This connector is suitable for use with most systems utilizing 6 pin devices. Also known as connector 31.

Connect these load borne modular jacks to a fully enclosed-carrying case, or any other panel with 6X" (15.2mm) cutouts. They are shielded to prevent interference with radio and TV transmission, and can be mounted in any position.