1/2" X 3/8" MILLIVOLT LOW PROFILE G
The 17607 WW 1/2" X 3/8" MILLIVOLT LOW PROFILE GAP WIRE is an all-welded carbon steel unit designed to connect sections of welded or seamless pipe. The gap wire was made on a proprietary wire mill feeding carousel and wound on a proprietary molding carriage to give exceptional accuracy and repeatability. This assembly is then precision laser trimmed to ensure tight dimensional tolerances. The gap wires are warranted for one year under normal conditions of use.
Designed for confined locations or overhead applications, our 1/2" X 3/8" Millivolt Low Profile G Underground Fitting offers the following features:
This is a miniature toggle switch designed for milli-volt low voltage control. It features the G mark and has a low profile design, 1/2" X 3/8" millivolt low profile G, and gold contacts.
This standard duty low profile switch is suitable for 1/2" X 3/8" millivolt controls.
The Robertshaw 17607 1/2" X 3/8" millivolt control puts the power of a millivolt system at your fingertips. This fully adjustable, low profile, millivolt control is designed to be used in tandem with an ST-7 AC power station for precise heating and accurate flow controls.
The MILLIVOLT series of wire wound-type sensor transformers are approved to the following performance standards: Underwriters Laboratories ® ( UL, C-UL ), ANSI/IEEE Std. C57.120, Generic Standard for Electric and Electronic Controls (CSA), and Canadian Standards Association (CSA). Additionally, ROBERTSHAW® sensors are approved by the US Department of Transportation.
The 17607 is designed to ground 120/240 VAC equipment up to 600 VA. The 1/2" MPT inlet accepts wires from #10 AWG to 1/0 AWG. The 3/8" side of the plug will accommodate 14-4 ACSR class B wires from minimum size #14 AWG to 250 MCM.