ASCO 110278 Red Hat Solenoid Valve, 2 Way, NC, Brass, 1/2 In

24/60 VAC 1/2" NPT. 2-WAY N.C. GENE

ASCO 110278 2-Way N.C. Brass Solenoid Valve has a 1/2 inch NPT connection and is rated at a 24/60 VAC.

This ASCO Red Hat Solenoid Valve, 2 Way, NC, Brass, 1/2 In. is a two way normally closed solenoid valve. It has an NPT 1/2 inch thread and brass construction. This solenoid features 1000 watts at 24 VAC or 60 VAC maximum wattage. This ASCO valve has a normally closed electrical terminal and a normally open electrical terminal.

This solenoid valve 2 way 1/2” NPT and 22, 24, 60 VAC works great as a pressure control valve for a low pressure system, temperature control, or back-up check valve. A solenoid valve (commonly referred to as solenoid drain valve) is installed on the inlet of a process line. When energized it permits fluid flow from the inlet to the outlet port by opening a spool valve within the body of the valve

ASCO 110278 Red Hat Solenoid Valve, 2 Way, NC, Brass, 1/2 In Threaded Connection: 1/2 In Spade Connection: 3/8 In. Cv Range: 0 to 400 SCFM at 4 In. H20 Flow Connection Type: 3/8 In . Item Mode: N.C.. Alarm Setup: N.C.. Maximum Working Pressure (PSI): 10

ASCO™ Red Hat Solenoid Valve, 2-Way, NC, Brass, 1/2 In Pipe Size Expands the possibilities of your system while also meeting industry compliance standards with reliable ASCO valves. 6-Volt Heavy Duty Solenoid Valves Made from brass and stainless steel for durability and corrosion resistance, valve is temperature rated at -40°F to +350°F (depending on model).

ASCO 110278 2-WAY SOLENOID VALVE Brass body Solenoid valve, 2-way, normally closed Head features external pressure connections for a wide range of media, 2-wire power supply, and six contact terminals Pressure contacts are sealed with Viton® or PTFE seals to handle steam media at 300 psi. Solenoid valve is supplied with a standard air solenoid coil. Waterproof seal is provided for use in wet environments, and optional dry seals are

The ASCO 2-WAY Brass Solenoid Valve provides cycling capability to a variety of air-powered tools, such as die grinders and chucks, as well as lathe tools. It features direct mounting, snap locking cable terminals, 0 to 125 psi operating pressure, and temperature rating of -67F to +400F. It has a max flow rate of 120ml/min and is made from brass for long lasting use. It also includes a 2-conductor cable. #