ASCO 8210G095 120/60 110/50 -120/60,110/50 Brass Body Pilot Operated General Service Solenoid Valve, 3/4" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 3/4" Orifice, 5 Cv Flow, 120V/60 Hz, 110V/50 Hz

3/4 X 3/4 2NC BRASS 10.1/FT AC

The ASCO 8210G095 120/60 110/50 -120/60,110/50 Brass Body Pilot Operated General Service Solenoid Valve, 3/4" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 3/4" Orifice, 5 Cv Flow, 120V/60 Hz, 110V/50 Hz

A brass body pilot operated two way valve is a solenoid valve used to control flow in a low pressure plumbing system. This general service solenoid valve features nitrile butylene sealing, a black steel bonnet and actuator, an orifice of 3/4", and 2 Cv flow. The flow can be adjusted with various neoprene sleeves. The valve uses 120 volts of alternating current at 60 hertz or 110 volts at 50 hertz.

ASCO 8210G095 120/60 110/50 -120/60,110/50 Brass Body Pilot Operated General Service Solenoid Valve, 3/4" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 3/4" Orifice, 5 Cv Flow, 120V/60 Hz, 110V/50 Hz

Our durable and versatile 120/60,110/508210G095 solenoid valves are pilot operated. They are Ideal for use in a wide variety of applications where precise control is required. The 3/4" NG threaded connection makes for easy installation and maintenance. The 8210G095 does not have an internal spring so it runs more efficiently and has better wear characteristics than other solenoid valves.

A compact, inexpensive pilot operated solenoid valve with a body constructed from brass. Designed for use in a general service application that sees frequent periods of on/off cycling and shaft rotation.

The ASCO D-8210 Series three-way general service solenoid valves are pilot operated valves sized for 1/4” through 3/4” (and larger) pipe sizes. The D-8210 Series offers 2-way normally closed or normally open configurations for pilot operation and 2-way selector positions to provide a wide range of control options.

The 8210G095 two-way solenoid valve provides precise flow control for backflow prevention applications. The normally closed inlet port is used to prevent contamination of potable water supplies by reversing the flow when non-potable water sources are attached to the coil inlet. This Brass Body Pilot Operated General Service Solenoid Valve is designed with a diaphragm and spring mechanism, allowing precise flow control. The 2-way Normally Closed valve provides a Cv of 5.00 cc/rev Typically used for backflow prevention on air conditioners to prevent cross contamination of potable water supply.