ASCO 100981 -120/60,110/50 Brass Body Hot Water Pilot Operated Diaphragm Valve, 125 psi Maximum Hot Water Operating Pressure, 3/4" Pipe Size, 2-Way Normally Closed, EPDM Sealing, 3/4" Orifice, 5 C

110/50 120/60 VAC 3/4" NPT. 2-WAY N

With the ASCO diaphragm valve's 3/4 inch pressure and temperature relief valve, you can prevent water heater tank damage that could result from over heating, excess pressure or freezing. The diaphragm and metal body are constructed of durable materials for long lasting use. The 2-way normally closed valve turns off water flow to the water heater when it's not needed for durations as long as 30 minutes. And, in the unlikely event that a freeze occurs, the relief valve will keep the tank from bursting. The ASCO 110/50/VAC 120/60/VAC diaphrag

The ASCO 100981 -120/60,110/50 Brass Body Hot Water Valve is a 3/4" inlet and outlet, two way normally closed valve. It has an plastic handle with brass body. The ABS is glass hardened and designed for installation in hot water heating system applications like heat exchangers, storage tanks, or water wall panels used for space heating applications with a maximum operating pressure of 125psi at an ambient temperature of 225 F (107 C). This valve is rated to be used with hot water at 140 deg F (60 C) with 230 psi at no more than 250 deg F

The ASCO 100981 -120/60,110/50 Brass Body Hot Water Pilot Operated Diaphragm Valve is primarily used to control the flow of hot water and is typically installed at the point of use. The valve opens automatically when hot water is required and closes automatically when the flow has been reduced sufficiently.

This diaphragm valve is ideal for commercial applications, with a maximum operating pressure of 125 psi, and 3/4" pipe size. This model also comes with a 2-way pilot operated design.

Designed for residential and light commercial applications, the ASCO 100981 Brass Body Hot Water Pilot Operated Diaphragm Valve with 2-Way Normally Closed is simple to install and includes a brass body, drain valve seat and a diaphragm. The valve can be used to pilot externally or internally actuated. It is designed for water up to 125 psi operating pressure.

Pilot Operated Diaphragm Valve 125 psi Maximum Hot Water Operating Pressure 1000 CFM Gas Supply Chg. EPDM Sealing, 3/4" Orifice, 5 C

A disc/seat design provides long lasting durability and excellent chemical resistance. The diaphragm valve can be used normally open or normally closed and is suitable for use with hot water up to 125 psi (maximum). The seat is constructed of EPDM material. 3/4" pipe connections at inlet & outlet.