FAN PROVER FOR SS-1 899-0500, FP521
Fan Prover for SS-1 899-0500, FP521, FP522, FP523, FP524 and SS4 Series Side Wall Vent Fans. SS1 replacement part FP521
This kit includes parts for the following SS-1 fan units: 899-0500, FP521. Parts may be mixed and matched within the same model of fan unit to replace missing or damaged parts.
(1) Fan Prover 899-0500 (1) Air Temperature Sensor FP521 BEMF The Fan Verifier prover kits are used for testing the air velocity of ceiling mounted exhaust fans. The prover can be installed into the top or side vent opening of the fan and a damper is inserted into the building ductwork run. Air coming out of the chart recorder will then pass through the damper, around and through the entire duct run including the fan being
This 4856 FAN PROVER KIT includes RT-1 ROOF TEMPERATURE TRANSDUCER, FP521 FORCED AIR FAN GASKET, FP522 FIREPLACE FAN GASKET, 10716 NETWORK CABLE and THE SS-1 WALL SIDE VENT SYSTEM. The 4856 Fan Prover Kit Side Wall Vent System Parts needs to be replaced if the MRTP-SS-1 Fireplace Side Vent for sS
The Fan Prover Kit includes the fitter, motors, control panel, LED display, and all necessary fittings for use on the SS1. The Fan Prover will determine if the system is operational and verify that there is no air leakage at any point in the installed ductwork. The FP521 is installed in place of an SS1 fan cover to perform a fan prove test.
The Fan Prover is a ‘just in case' accessory for SS-1 appliance owners. It can be used to test if the fan and blower motor operate properly, keeping the fan blades from contacting the housing should they have become bent. The side wall vent system is very efficient at moving smoke and heat out of your kitchen. A missing or broken vitreous glass window can cause excess heat buildup inside the side wall vent system, which is why it's important to replace it when damaged
Jernlund A/S Fan Prover for the SS-1 range of bottom and side wall vent products. This product is manufactured in Sweden and designed by Jernlund A/S engineers.