TJERNLUND 4863 115V 1/4 HP MOTOR KIT FOR HS-3 880-0215 880-0214 D

115V 1/4 HP MOTOR KIT FOR HS-3 880-0215 880-0214 D

The 4863 115V 1/4 HP MOTOR KIT FOR HS-3 880-0215 880-0214 D is a 115-volt, 1/4 hp motor that runs at 6,000 rpm to provide the unit with the power needed to process hard materials. It can effectively crush up to 3 inches with this powerful motor

TJERNLUND 1/4 HP MOTOR KIT FOR HS-3 880-0215 880-0214 D. 115V, 1/4 HP, 115V

… The HS-3 880-0215 line trimmers are award winning and extremely popular, this can be seen by the fact that they are a best seller on Amazon. The only thing stopping these trimmers from being the perfect trimmer is its small 1/2 HP motor. By adding a high torque 1/4 HP motor, performance will be significantly better. With the addition of this kit, your unit will have the same amount of cutting power as units sold for hundreds more.

The kit contains an HS-3 main motor (48639), pulley (48642), belt (48641), and mounting hardware. The main motor can be used with the HS-3 880-0215-D and HS-3 880-0214-D saws.

The motor is not designed to be removed or re-mounted. The HS-3 series of hole saws come with a 1/4-HP, 115V AC Motor "KIT", Catalog Number 4863. This motor is built to last and will be the workhorse of your shop for years to come.

The perfect propulsion for a super quiet installation. It's everything you need in the motor and controls to run the HS-3 1/4'.

The standard RPM for the HS-3 hydraulic pump is 1600, and this kit has a motor rated for 2000 RPM. This increases pumping pressure to your tool by 3X.