FLAME SENSOR, REV AG2 GAS GRIDDLE
The Flame Sensor, Rev AG2 Gas Griddle is a device that is used to detect the presence of a flame in a gas-fired boiler or furnace. When a flame is detected, the sensor will activate and send a signal...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account"24v 3.5"" wc Nat 1/2"" Gas Valve"
This fan control, in conjunction with the included mounting bracket, fits a standard wall-mounted electrical box. The control assembly is UL listed and is equipped with a three speed 1/32 HP motor that operates at 120V. Specifications include a 3-1/2" square face plate and 5" square mounting flange. Designed for use in areas where noise control is important.
This product is intended for installation of an exhaust fan in a finished ceiling. It must be used as part of an approved exhaust system. The unit must also be installed over a duct that will carry air from the bathroom, kitchen or other indoor source of moisture to the outdoors. The unit is wired between the fan and the electrical service. The terminals are labeled for easy wiring and should not be tampered with in any way or removed from the box.
REZNOR Fan Control, 1-pole, 2-throw, 0.
The Reznor Fan Control w/o Brkt is a wall mounted unit, which allows the user to control the speed of a ceiling fan. It comes complete with mounting bracket, wire and screws. It has been engineered to provide optimum performance and function.
These limited-edition power supplies stay true to the Reznor tradition with an all-aluminum chassis, 100% Japanese capacitors, and high-grade wiring. In a bold move away from traditional ATX standards, we’ve replaced the standard 20 pin connector with a 24+4 pin variant. Our engineers did not just blindly increase the number of pins - in addition to charging more pins, we also doubled the voltage capability of the standard ATX connector (7V to 14V). This means that you can power even more hardware – like ZX Spectrum clones!
Reznor 146464 "Fan Control w/o Brkt
Reznor 146464 "Fan Control w/o Brkt. This item is a part of the Reznor Range. This Fan Control is used for ventilation systems and domestic appliances where fan speed control is required. It can be wall or ceiling mounted using the brackets provided. When installed in a casing, a continuous slot must be cut in the casing to allow free movement of the operational handle and lever arm provided. A grade 5 mounting screw must be used when fitting to a wall or ceiling void, which will require further drilling into the wall or ceiling void.
The Reznor 146464 Fan Control w/o Brkt is a simple and easy way to control the speed of your ceiling fan. This 5-speed, three-button wall control requires only a single installation screw to enable you to easily control the speed of your ceiling fan without having to access the wiring of your ceiling fan.
Neuco Inc. is a leading US based supplier of replacement parts for home appliances and consumer electronic products, including home theater components, audio speakers, DVD players, air conditioners and water heaters. We have been in business since 2003 and serve the professional installer market from our 10,000 sq ft. warehouse in Maine. We are the authorized dealer for some of the leading brands in our industry. Through our relationships with these manufacturers we have developed an extensive knowledge base that has allowed us to develop certain proprietary systems and product offerings that set us apart from our competition.