98022S 1/6 M PSC 115/1/60 SERV 1/6 M PSC 115/1/60 SERV

1/6 M PSC 115/1/60 SERV

The 1/6 M PSC 115/1/60 SERV is a low voltage distribution panel and transformer. It provides an output of up to 60 Amps, with an input of 208Y/120 or 230/240 VAC. A perforated top grille accommodates two wiring modules (not included), providing a flexible method for electrical wire termination that eliminates visible wires running to the panel. It is ideally used in applications such as laundries, offices, and high density residential facilities for single phase service. The front features an input breaker that resets to safe upon power restoration and the enclosure is suitable for interior

The 98022S 1/6 M PSC 115/1/60 SERV is a 3 phase engine driven dual axle Water Truck, battery container. The trailer provides the motive power for pumping and carry the water to the fire. The truck and trailer may be attached to a pumper fire apparatus to pump water at a hydrant or deliver water in other emergency situations.

The 98022S 1/6 M PSC 115/1/60 SERV is a Vertical mount compressor that uses a scroll compressor. Its R404A refrigerant is environmentally friendly. It has an oil-less and carbon brushless motor for more efficient performance. There is no drain, and the discharge muffler can be tilted for easy maintenance. The sound levels of this Vertical mount compressor are 1,678 decibels during operation and 73 decibels during startup.

The PSC115/1/60 is a 120 VAC, 60 Hz, 11.5 amp appliance rated at 115 VAC between legs 1 and 2 with a voltage rating of 1 phase, 60 Hz. This item has one NEMA 5-15 receptacle/plug that is mounted on a 1-1/6" DIA x 1-3/4" long brown floating mount.

The MPSC models are the highest output (115kW) generator set with cooling. The engines, rated at 200 HP each, provide minimum power speed of 1750 rpm at 2150 watt output. These high efficiency units provide a minimum of 3 hours running without any maintence. Generators may be removed from shipping skid and set up to provide field testing and maintenance. All necessary nozzles must be provided by customer for lubrication.

A one piece hydraulic jack that incorporates a built in 1/6HP air compressor. This jack is constructed of aluminum for light weight and durability, and has a combined maximum travel of 22 feet. This unit includes a flexible belt guard and cast iron wheels designed to produce additional power during the initial stroke while reducing breakage, and also includes an innovative dual action pump with a relief valve for ultimate reliability.

Professional steam turbine set of a 1/6 scale model of a double-circuit high-pressure turbine for stationary steam engines. Model of exceptionally high precision and engineering. The outer shape is made from steel with rhodium-plated bearings; the impulse casings are made from cast aluminum alloys and covered with bronze. The turbine consists of a two-stage rotor that matches air inducer, manufactured as a casting with internal cooling channels by gravity casting.