Johnson Controls 7269 A-4300-601 CONDENSER FAN MOTOR FOR AirDry

CONDENSER FAN MOTOR FOR AirDry

The CONDENSER FAN MOTOR FOR AirDry controls the amount of energy needed to cool a room by increasing or decreasing the time air remains in contact with the evaporator coil. It consists of a fan, motor and fan guard. This is a genuine OEM replacement part.

The A-4300-601 CONDENSER FAN MOTOR FOR AirDry has a voltage of 208/230/460 VAC, frame size of 15.5x11.52x47.63 (.31 cu. ft.) and is designed for use in the HTF30A208A - 30/50/60 Hp Condenser Fan, 190 max CFM - 60 Hz Air Drier

This replacement Condenser Fan Motor for AirDry is designed to fit into AirDry Model # A-4300-601 condensation dryer, which is used for school locker rooms, apartments (hotel, dormitory), hospitals (nursing home, care facility), residential applications, small commercial applications (office building), and others. This condenser fan motor provides maximum air flow to keep drying clothes cool, dry, and most importantly bacteria-free.

The Condenser Fan Motor for AirDry provides cooling for all AirDry systems. This motor has a short life span and will require replacement.

The A4300 Condenser Fan Motor for AirDry™ evaporator coil cooling systems is designed and manufactured by Johnson Controls to meet or exceed OEM specifications. For use in air-cooled appliances such as room air conditioners and industrial chillers, this motor fits several models of Broan-NuTone, Goodman, Goodman/Amana, Payne, and Thermo King refrigerated air handlers.

DESCRIPTION: The Condenser Fan Motor on your AirDry dehumidifier provides the movement of the Condenser Fan that pulls out the moisture collected by the condenser coil. This motor is on your AirDry dehumidifier's Condenser Assembly, located outside on the right side on top of the machine. Remove the motor to replace it.

The product is a condenser fan motor for AirDry units. It is used to control the temperature of the condenser and has an internal and external brushless motor. The internal and external brushes in this fan motor will not wear out and it is maintenance-free. This motor is made from high-quality copper wires and advanced magnet materials with aluminum shell and can resist corrosion for a long time

This Condenser Fan Motor is an OEM Johnson Controls replacement part manufactured by Johnson Controls for use with AirDry units. The Condenser Fan Motor is 5/16" shaft length and has a 5/8" diameter. The Condenser Fan Motor operates on single phase 115V rotational speeds at 1475 RPMs. It comes complete with motor capacitor, power cable and 1/2" knock out plug already installed prior to shipment.

The Condenser Fan Motor is a complete element, including fan blade and motor leads for the AirDry series of heat pumps.

Johnson Controls small condenser fan motor is used to circulate air through our cabinets to ensure optimum drying.

The A4300 series of condenser fan motors are designed for use on air-cooled condensing units with BACnet communication. The A4300 motors are ac motors that feature variable speed control, which is integrated into the blower assembly. The motor's variable speed control is accomplished by varying the voltage applied to the motor terminals through a variable voltage divider network connected to terminal board AC1.

The 7269 A-4300-601 purifier fan motor directs airflow through your indoor units for system drying. It replaces the older model of motore used in series 4000 units. The A-4300-601 fan motor is identical to the AP00-0112 AP1207 -0112 motor.