Johnson Controls 7121 A19 Series Remote Bulb. Control, Single-Pole, Single-Throw, Manual Reset 78502808480 .

REMOTE BULB TEMPERATURE CONTROL W/M

Remote bulb temperature control is a 1-piece actuator body design with an extendable flange designed to reduce the length of the actuators by up to 50%. This remote bulb temperature control also features manual reset which provides increased electrical safety, and a plug-in junction box.

Tired of resetting your thermostat multiple times a day? With the remote bulb temperature controller, for single-pole circuits only, you can override the programmed room temperature setpoint and instantaneously reset it up to 25°F higher or lower. This lets you make rapid adjustments to room temp without disturbance.

Johnson Controls 7121 A19 Series Remote Bulb. Remote bulb temperature control, single-pole, single throw, manual reset. Use in place of any 15 amp A19 remote controlled incandescent lamp not previously converted to operate on a low voltage. Commonly used for humidifiers and deionization systems.

This Remote Bulb has a triple function. It can be used as a manual on/off switch, temperature control to speed cooling or heating, and as a timer switch to store the temperature setting to repeat the setting at any time. The LED indicator light shows when the switch is turned on.

THERMADOR Single-Pole, Single-Throw (SPST) Remote Control

"Change your lightbulb from up to 100 ft away! The Lutron SC-7C is a single-pole, single-throw remote switch that can be used in place of a standard wall switch. It's designed to work with incandescent lighting and electronic low voltage transformers (ELV). It's often used as part of a home automation system or to preset a mood or scene.

The Johnson Controls 7121 line is designed for HVAC applications where manual resets are required. Applications include thermostat bulb, VAV terminal units and fan power in bases. The 7121 line has 1-1/8 diameter screw terminals without a mounting stem. The mechanical action of turning the screw terminals when wiring circuits enables the housing to be sealed against dirt and dust from entering interior parts.