A419GBF-1C 24V SPDT SINGLE STAGE DIGITAL TEMPE | REPLACED BY A421GBF-02C

24V SPDT SINGLE STAGE DIGITAL TEMPE

Johnson Controls 42585 A419GBF-1 24V-AC -30-212DEG F TEMPERATURE CONTROLLER 24VDC SINGLE STAGE DIGITAL THERMOSTAT SYSTEM CONTROLS IBEC OR REFRIGERATION APPLICATIONS

The D492051 is a 24 VAC-30-212°F single stage digital temperature controller in a 1/4" thick DIN-Rail mount package. The unit features an industrial grade NTC thermistor, over/under voltage protection, output temperature over/under power limit protection, and high ambient protection. It provides precise and reliable control of the temperature of the heating or cooling load. This 240V t3 temperature controller is compatible with 208-240V 50Hz; 115

The Johnson Controls 42585 A419GBF-1 24V-AC -30-212DEG F TEMPERATURE CONTROLLER D492051 is a 24 Volt Digital Temperature Controller from the Johnson Controls Commercial Modular Controllers family. This controller has a SPDT Switch, 24 Volts, and cools the Thermostat to 212 degrees Fahrenheit. The A419GBF-1 (42585) represents a family of Commercial Temperature Controllers based on the 45V

This Schneider Electric Johnson Controls 42585 A419GBF-1 24V-AC -30-212DEG F TEMPERATURE CONTROLLER D492051 is used in commercial or residential applications for a temperature controller. The -5 to 55C control range of this Johnson Controls 42585 A419GBF-1 24V-AC -30-212DEG F TEMPERATURE CONTROLLER D492051 allows for accurate temperature control within the operating system

The Johnson Control 42585 A419GBF-1 is a 24 VAC -30-212°F TEMPERATURE CONTROLLER. Power: 1W. Accuracy: ±1%. Operate Time: 2 sec. to 99 hr 59 min 59 sec., Stop Time: 30 sec. to 99 hr 59 min 59 sec., Warm-Up Time: 2 sec. to 99 hr 59 min 59 sec, Repeatability: 0.1°C or 0.05% of

The Johnson Controls 42585 A419GBF-1 24V-AC -30-212DEG F TEMPERATURE CONTROLLER D492051 is specially designed for Johnson Controls, General Motor Corp Cadillac, GMC and Chevelle heating and cooling systems. The part also specific to Air conditioning and heating controls such as air receiver.

The Johnson Controls 42585 2-stage temperature controller features a 4-20 mA output signal that may be modulated without degrading the output. A non-volatile digital display shows setpoint, output, and a status indicator that displays: energized, ready, fault, or pending alarm. The controller has a built-in relay with normally open contacts rated to 24VAC/20VA. It includes an 8 ft lead with either a 3 or 4 pin connector for communicating to the control