Johnson Controls 7311 Thermistor Temp Sensor Duct less Enclosu

DUCT SENSOR; LESS ENCLOSURE; 60/120F

Control is key when it comes to comfort, and our Johnson Controls 7311 Duct Sensor Thermistor does all the work. Able to monitor temperature, this device can be programmed for different operations. It can also be set up with a time clock, so the system only turns on or off at predetermined times. This product is an all-around good guy and will always keep you comfortable. If you don't have one, get it now!

The Johnson Controls 7311 Thermistor Ductless Enclosure is useful for integrating a sensor into a duct system between the air handler and air delivering device. It can be used in any application where HVAC controls or equipment are located remotely from the air conditioning installation.

The Johnson Controls 7311 Thermistor Temp Sensor Ductless Enclosure is used for mounting the Johnson Controls 53900-201 2-wire, 2-lead, type 7311 thermistor temperature sensor. The enclosure can be installed in any indoor location, and it has a weatherproof design with gasketing to help protect against moisture, dust, and dirt. It's suitable for commercial and residential applications.

The Johnson Controls 7311 is a thermostatic sensor that starts the furnace pump when temperature drops below set point (60F) and stops it as temperature rises above set point (120F).

Johnson Controls 7311 Thermistor Temp Sensor Duct less Enclosu

This is a Johnson Controls 7311 Thermistor Temp Sensor Duct less Enclosu product. It is used in HVAC/R refrigeration, industrial machinery and commercial refrigeration applications.

The Johnson Controls 7311 Thermistor Temp Sensor Duct Less Enclosure provides an ideal sensing solution for applications requiring remote mounting in harsh environments. The sensor is housed in an industrial grade NEMA 4 enclosure with a protective gasket for a rugged and reliable, leak-proof design. The sensor is ideal for outdoor use on HVAC systems, commercial refrigeration and freezers, data centers and warehouses.

7311 Ducted Thermistor Temp Sensor - 60/120f Range - 40 to 120 deg F (4 to 50 deg C) Temperature Range For Indoor And Outdoor Applications.

The Johnson Controls 7311 is a patented heat-sensing, temperature-compensating sensor that senses the temperature of the air passing over its sensing element. The 7311 on-site sensor compensates for variations in airflow, thereby eliminating the need to calibrate it against other temperature measuring devices. It features a rugged 316 stainless steel housing and a three wire configuration with a minimum temperature of 60°F and maximum of 120°F. The Johnson Controls 7300 series comes in various sizes ranging from 6" to 24" lengths. Now you can practically install your ductless system in minutes with no tools!