ERIE 78123 Schneider Electric () AP13A000 24v S/R NC 4-20ma OR 0-10vdc

24V PROPORTIONAL N.C. GENERAL TEMPE

AP13A000 24V Proportional Control Voltage 0-10Vdc, N.C., Equip. Type: S/R, Rated Load Amps 3/4 Eff. 17mA (145VAC), Switching Code: OR, Phase: N, Volts 24V, Amp Range 4-20ma, Stall Amps 12A

Our 24V Proportional Transmitter with N.O. (normally open) output replaces any obsolete transmitters from other manufacturers and can be used for industry standard photoelectric applications or as an economical alternative to our open-collector photo-transmitters that require external level processors for automation systems. The Model AP13A000 transmitter has a built-in general purpose signal conditioner which provides for operation over the 4-20mA or 0-10VDC signals, including neutral

Designed for general purpose, liquid level and position control applications up to 6 metres (20 ft) in height and/or 100 metres (300 ft) in length. ERIE 24V proportionals have an electrical motor with a torque output of only 0.2% of the rated operating torque per amp of current drawn so they can be used where currents are high or for large loads.

The Erie 78123 Schneider Electric () AP13A000 24v S/R NC 4-20ma OR 0-10vdc, a proportional control valve that is for industrial or commercial HVAC applications, and is ideal for cooling, heating, and ventilation system applications. It is normally closed (NC) type of 4-20mA output, with heavy duty fiberglass reinforced mechanical actuator with stainless steel lead wires.

The Schneider Electric () Meter is a versatile 4-20 mA or 0-10 Vdc meter with selectable Stat, Function, or Proportion Control. It is available as either N.O. (normally open) or N.C. (normally closed) and can be used individually or wired in series/parallel for higher power applications. * DT DATE TEXT ALIGN=CENTER> FLEXIFILM CONSTRUCTION MEETS CAL 1 & 2 CLASS

The Schneider Electric AP13A000 low voltage solenoid valve is a proportional, normally closed solenoid valve used for SPC control. The body fills with compressed air to provide electrically operated isolation of the actuator. This valve can be mounted on DIN rails and connected to the electrical power system via terminal lugs without the requirement of a wiring harness. In addition the option to control this valve directly and remotely is available with 0-10 VDC or 4-20 MA current loop

Schneider Electric AP13A000 is part of a family of Power, Light & Motion Sensors. These sensors can be used to detect the presence of objects in dark areas and are suitable for automatic security lighting and for presence detection in any industrial application. The output can be inverted from OR to NC to suit your application.