ERIE AP33A000 Schneider Electric () 24v NSR 0-10vdc or 4-20ma

24V PROPORTIONAL NON-SPRING RETURN

Erie EG6000 Foil-less Dual Element, 24V PROPORTIONAL NON-SPRING RETURN

The Schneider Electric ERIE AP33A000 is a proportional non-spring return pressure transmitter is ideally suited for HVAC/R, Laboratory and Materials Testing applications where performance under higher pressure coefficients (non-linearity) is required. Its rugged 14-7 stainless steel body provides high reaction voltage tolerance as well as resistance to conductivity and corrosion. The stainless steel K thermocouple junction with 15 ft capillary makes it suitable for corrosive or humid application. The rosewill 19v5 adapter enables you to power the device from standard 110/220V AC outlets thus alleviating any need for batteries or other environmentally

The new AP33A000 from Schneider Electric is a non-spring return proportional valve with remote spool position feedback signals. The AP33A000 valve is available in up to 24VDC supply voltage and variable or fixed stroke. The valve incorporates a bar graph display as standard.

The AP33A000 is a 24 VAC proportioning valve designed to supply non-spill return (NSR) proportional control of sulfur hexafluoride (SF6) on a single SCB2 miniature circuit breaker (MCB). This proportional valve is suitable for use in fire protection systems.

Erie's AP33A non-spring return proportional valves are designed for pressure control applications in which minimum pressure drop or quick response is desired. The stem type valve has high accuracy, low hysteresis and on/off characteristics similar to diaphragm valves.

The AP33A000 is a proportional, 3-wire (2-conductor) analog output module from the NSR family of outputs for process control applications. It delivers reliable performance over a wide temperature range (-40 to +85°C / -40 to 185°F), and its compact design allows for lower installation costs. This 0-10VDC output module features a standard size terminal block and signal conditioning electronics including thermal rollback, input amplifier, internal SCR protection, and status indications.

A Hard-to-find low current 0-10vdc or 4-20ma NSR encoder for wind, water and solar power applications. The NSR current proportional sensor (also known as a 'current transformer') feeds back direct proportional voltage depending on the load current. Rated for 1/2 to 20A.