220/60 VAC 1/2" NPT. 2-WAY N.C. GENERAL PURPOSE BR
Achieve a tight shut-off with this brass body pilot operated general service solenoid valve. It has a two-way normally closed design that is suitable for air and other non-corrosive liquids. The valve's NBR Buna seal can withstand temperatures from -20 to 260 degrees F. It comes with a 4 CV flow capacity at 60 psi and 120/60 VAC, single phase wiring.
ASCO 113759 brass body pilot operated general service solenoid valve, 1/2 inch pipe size, 2-way normally closed, nitrile butylene sealing, 5/8" orifice, 4 Cv flow, 120 Vac/60 Hz at 90 Deg Fahrenheit, 110 Vac/50 Hz at 90 Deg. F. Pilot Pressure PSI at 2 GPM 15 VA @ 120 VAC
This two-wire normally closed solenoid valve opens when energized with 120/60 volts AC and the air pressure is less than 60 psi. The electrical current can be interrupted by an applied electromagnet to start and stop the flow. Features brass body construction, 1/2-inch pipe size, single orifice, 4-inch compression nipple, suction helm port and spring return seat.
Two-way brass bodies pilot operated solenoid valve. Two coil windings connected in series per Nema specifications. Five adjustment positions as indicated in the chart below. Contact rating listed is based on 24 VDC, constant current and 100% duty cycle.
Our General-purpose solenoid valves are used to control water, oil, air or steam. The valves may be installed directly on tubing or on a manifold for remote operation.
A wide variety of electrical, mechanical, and hydraulic control valves combined with a broad spectrum of process connections make ASCO the manufacturer of choice around the world.
Our valuation of this item is lower than the book value. Can ship within 3-4 buisness days after payment.
Free Shipping
In stock
