ASCO EF8210G2 Ametek Drexelbrook VeriGAP 404-1000 Series Level Control & 705 Series Sensor

"1/2""NC

This sensor is UL listed, CE marked, CSA certified and built to the highest quality standards

The ASCO EF8210G2 is a 1/2""NC air pressure switch designed for pneumatic control applications in various industrial sectors

A level control is a pressure differential switch used to control a flow or level indication

It has been designed to be used in both horizontal and vertical tanks

For the 705 Series Sensor, you can choose between a ¼""NPT and ½""NPT orifice, which will fit any standard 7/16" or 1/2" line size

This air valve is specifically designed to open with a differential pressure of 7 in

A solenoid is required for this air valve

ASCO EF8210G2 Ametek Drexelbrook VeriGAP 404-1000 Series Level Control & 705 Series Sensor - 1/2"Nc

WC and close with a differential pressure of 5-10 in

The ASCO EF8210G2 is a Water Level Controller that incorporates two separate water level sensing zones

The ASCO EF8210G2 Ametek Drexelbrook VeriGAP 404-1000 Series Level Control & 705 Series Sensor is a 1/2" NC and is used to control the level of the liquid in many different applications

ASCO EF8210G2 Ametek Drexelbrook VeriGAP 404-1000 Series Level Control & 705 Series Sensor

When the fluid being controlled rises above or falls below a predetermined "set point", the pressure on either side of the diaphragm is equalized, causing the diaphragm to move in relation to its seat

This also helps save space as well as make it easier to install

It typically consists of an airtight diaphragm, piston, and connection tubing

The ASCO EF8210G2 Ametek Drexelbrook VeriGAP 404-1000 Series Level Control & 705 Series Sensor is a level control that is used in a variety of industrial applications to control the flow of fluids

Neuco Inc has provided quality and innovative level control products since 1971

ASCO EF8210G2 is a 1/2""NC, Electrically Operated, Air Valve that opens and closes in response to differential pressure across the diaphragm

Product Description: ASCO EF8210G2 Ametek Drexelbrook VeriGAP 404-1000 Series Level Control & 705 Series Sensor - 1/2"Nc

The diaphragm is positioned between the fluid being controlled, and an outside reservoir

It is designed with a magnetic reed switch that is located in the supply pipe to detect when water is present

The level sensor can be used in a variety of ways and has been used in waste water applications and also oil tanks

WC

There are many different options that can be selected including: Voltage, Flow Ratings, Water-Cooled versions (Copper or Stainless Steel Flanges), Pressure Ratings (up to 3000 PSI) and more

The switch is suitable for an air range from 0 to 125 PSI

This model has two electrical ratings, one for 120 VAC and the other for 240 VAC, and three outputs: normally open (NO), normally closed (NC), or pilot operated

ASCO® EF8210G2, Ametek Drexelbrook VeriGAP 404-1000 Series Level Control & 705 series sensor are the products of Neuco Inc

Its closed-loop technology allows this to function as both a manual reset device and as an automatic reset device

The sensor can be mounted on either side of the tank, allowing for it to be installed on the side closer to the pump

This sensor can be used on various industrial applications such as boiler feed water, condensation steam, chemical feed/boiler feedwater/refrigerant/air conditioning/air drying systems etc

The level controller can be adjustable from 1/4"" below flush to 2"" below flush

The ASCO EF8210G2 Ametek Drexelbrook VeriGAP 404-1000 Series Level Control & 705 Series Sensor is a gauge pressure transmitter that measures a fluid pressure and converts it into an electrical signal

Actual product may vary from picture shown

This movement causes a signal to be transmitted from the switch via tubing to either an indicator device or controller (such as a PLC)