Honeywell 12145 , Inc. Circuit Breaker Transformer, 75 VA, 208V, 277V, 48.

75VA TRANSFORMER 208/277/480V - 24V

The 75VA, 208/277/480V- 24V Transformer provides power when the circuit breaker blows. Matching your voltage, style and capacity - this durable transformer comes with a mounting bracket for easy installation and includes hardware for mounting.

Circuit Breaker Transformer, 75 VA, 208V, 277V, 480V - 24V

Small, easy-to-use transformer converts 208V, 277V, 480V three-phase power to single-phase, 24V power for use with non-delta neutral loads. Small size is ideal for metal fabrication and other low amperage, non-delta neutral applications. Built in ground fault trip protection helps ensure circuit breaker protection.

Circuit Breaker Transformer, 120V 48VA, 24V 2.4VA, 2.25A Maximum Input Voltage, Maximum Output Current ? 24VDC @ 3.5A, 88-0-88% Line Regulation, 88-0-88% Load Regulation Typical, 89% Efficiency at Full Load with 1-Ph 208/230VAC Supply and this unit will be shipped from the Honeywell Store in New Hampshire

The D1075-48-48 is a single pole, 30 amp circuit breaker operated transformer that utilizes type 3 wire. It has three taps for maximum flexibility over the range of 18 amps to 48 amps.

Insert the 72" cord into the rear of your heat source. Connect the smoke sensors to all exposed rails on your heat source using 40 amp fuses. Honeywell smoke detectors should be placed no less than 20 feet from the heat source, and within sight of each other. Do not exceed 75' total run length of cord/fuse/sensor/cord bundle connected to a single outlet. Connect the transformer output to your electrical supply with the 7-1/2” plug on

Heavy-duty 13A complete 2 pole isolation transformer withstands shock, vibration and temperature instability. Maintains protection of sensitive electronic equipment and devices, such as computers, microprocessors and memory modules. Ideal for power surges and drops with its over-voltage protection. Oversize terminal screws accept up to #10 wire. Transformer is ideal for printers, video displays and power supplies