Honeywell 12145 , Inc. Circuit Breaker Transformer, 75 VA, 208V, 277V, 48

75VA TRANSFORMER 208/277/480V - 24V

This HONEYWELL circuit breaker transformer features a rating of 75VA - 208/277/480V - 24V. The 3-phase 480 VAC has a voltage rating of 208/277/480 VAC, a current rating of 24 A, and a power rating of 75 VA. The simple design features six copper terminals and is UL listed and CSA certified.

Optimize the performance of your Honeywell Access controller with this 75 VA Transformer. This transformer will power your access control device using 120 V and require a 208/277/480V input power source that is 24 V compatible.

The Honeywell Line Interactive Circuit Breaker Transformer (CLTB) 12145 is ideal for applications where a standard disconnect switch or transfer switch is required. The 75 VA transformer provides the proper voltage at a given load current to operate most loads in the 208/277/480V range.

The Honeywell TA-24VA transformer provides 24V AC from 208/277/480V three phase power. Includes a NEMA 1 enclosure designed for mounting on the wall (bracket not included). Cooling is provided by convection, and the CE compliant unit meets the requirements for use with electronic/magnetic devices and has short circuit protection.

This fixed-voltage transformer converts 208V, 277V and 480V phase-to-line voltage down to 24V/0.5A single phase output. This transformer uses an internal diode to allow polarity reversal with no damage. Use with power source of 208V, 240 V, 277V or 480 V. This transformer has NEMA 3R rating protection, providing GFCI protection for household bathroom receptacles and many other general use applications only when at least one end of this circuit is connected to a "Grounded" (earthed) two-wire system not exceeding 210 watts.

Honeywell 75VA / 48V AC circuit breaker is used for lighting or separating a load from an electrical supply. The Honeywell circuit breakers are solidly constructed and designed using the latest technologies. It has a quick trip mechanism with double interlocked mechanisms for added safety to prevent accidental tripping when there is no load on the circuit.

The Honeywell 12145 circuit breakers are available in 208/ 277 volt and 480 volt configurations. These circuit breakers are used to customize induction temperature limits of AMI motor starters in accordance with the National Electrical Code (NEC). The load ratings depend on which terminal is used for the power supply.