Honeywell 2005 , Inc. NEMA D Standard Universal Stripped-Down Transformer, 120V

40VA TRANS 120V-24V FOOT MOUNT REPL

The Honeywell 2005 is a NEMA D standard universal stripped-down transformer, 120V. It is for use with NEMA D single phase loads. It has a rating of 40 VA. It features a 24V FOOT MOUNT REPLACEMENT with 120V MODE and a secondary voltage of 500 volts. The voltage is 120 V. This product is manufactured in China and was made in 2005.

NEMA D-STANDARD, 120V, 4.0A MINIMUM LOAD, 120V STANDARD CONNECTOR FOOT MOUNT REPLACEMENT TRANSFORMER rated 40VA

The NEMA D Standard UL Listed 2005 40VA 120V-240V Transformer from Honeywell is a stripped down wall mounted transformer with foot mountable terminals. For replacement applications, i.e. those that do not involve a disconnect button, the unit needs to be hard wired into the facility emergency power system, and should not be used without a properly installed disconnect switch.

Power up all your devices with the Honeywell 2025D NEMA D Standard Universal Stripped-Down Transformer. Designed to be used as a replacement for transformers with voltage ratings of 120V, this stripped-down transformer features a 24V output, a noise filter and meets NEMA D standards. It also permits the presence of one or two floating neutrals to facilitate grounding in a three-phase system. This NSF and cUL listed device includes a 2 year limited warranty that protects against defects. Voltage: 115 V Wattage: 40 VA Approvals: CSA CUL NSF Package Contents: H2

When you need to work with a transformer and don't have room for the full package, strip down the wiring and mount this stripped-down version. It's a size-reduced version of the 2005 transformer, providing 40VA at 24VAC/DC output.

The Honeywell 2005 NEMA D Standard Universal Stripped-Down Transformer is a foot mount type and can be used for supplemental power to Industrial or Aerospace equipment. There are 3 different mounting options of flange, stud or bracket.

The Honeywell 2005, Inc. NEMA D Standard Universal Stripped-Down Transformer, 120V controls the flow of alternating current (AC) power by introducing it to a load on the secondary side of the transformer. Standard models convert 120 VAC to 24 VAC. Replaceable cores on the secondary side provide single-phase or three-phase output.