48VA TRANS 480V-24V FOOT MOUNT
480V-24V Energy Limiting Overload Protection, 3 pole, 2 wire, solid state Type: Transformer 480VAC (L1) to 24VAC (J1) 2026 Frame Size: 48VA Conductor Terminals: Screw Terminals Type of Enclosure: IP20 - Dust Protected Voltage Rating: 480/277 V Phase: 1 Amps Continuous Secondary Load: 10A Circuit Breaker AC Idle Current Rating (IAC): 3A Overload Protection Characteristics: Class B - Thermal Magnetic Device Type of Mounting Mechaism: Foot Mount Mounting Kit Included Compliance Markings:
480V-24V VOLTAGE TRANSFORMER, METERED 48VA, FOR USE WITH MULTIUNIT SQUARE D 3 PHASE CIRCUITS. INCLUDES (4) 12" LEADS AND COMPRESSION FITTINGS. 24V TRANSFORMERS ARE NOW W/ BINDING SCREWS AS STANDARD.
This product is a self-contained, four-winding, center tapped 480V-24V transformer with frequency limiting overvoltage protection and electrical connections on the side and end terminals. The 480VA has an overload thermal protection circuit which is electrically supervised and will cause the unit to trip at approximately 146 percent of rated current. The 2026 is for applications requiring 480V-24V/120V primary voltage.
Provides 480V on the output side for use as a branch circuit power supply for loads of 480V (Maximum 18A), 24v, or 120v. Features three screw terminal connectors, an external fuse and a NEMA 3R enclosure. Has screw terminals at 4" spacing.
The 2026 is a two winding-core transformer with 12" lead wires. It provides 480 Vac at 24V constant voltage output and is compatible with the following Honeywell electronic ballasts: HQ250T-24, Q250T/D, D125T/D, D100T/D, VH150T/D, VL400T/D, VL100T/D
This 2026-48T-12A 480 vac autotransformer is Energy Limiting and uses 3 windings: primary, 150 volt winding, secondary, 24 volt winding, and a neutral. The overall rack mount height is 2.0 inches (50.8 mm), the mounting hole centers are 0.75 inch (19 mm) apart. The lead wires are 12 inches in length and will stretch to 18 inches long upon installation.
The B6-12T frame accepts one 0.5 to 5 HP, 208/230VAC motor at 24 volts. A high limit switch is built in for overload protection with removable fuse for line circuit protection. The frame's 8-7/8 inch wide x 14-7/8 inch high front provides ample ventilation around the motor.
Free Shipping
In stock
