WHITE-RODGERS S84A-410 S84A-410 40VA 120V-24V PLATE MOUNTED TRANSFO

40VA 120V-24V PLATE MOUNTED TRANSFO

The S84A-410 is a 24VAC/120VAC, 40VA, straight line power supply with built in voltage and current limiting for use with 24VAC/120VAC plate mounted controls. The unit is available in 0 to 30VDC or 0 to 10VDC control voltage models. This device is designed to meet the specific needs of a variety of applications, including electronic ballasts, digital controls, and high density LED lighting systems.

The S84A-410 is a dual voltage, single phase transformer that converts 120V to 24V and is used for heating and air conditioning applications with or without auxiliary heat.

This item is new in box and is a genuine WHITE-RODGERS part. It has been professionally tested by an electrician for pressure and temperature before shipment. The picture shown above is for illustration purposes only, please refer to the detailed description below.

This is a replacement part for your existing unit. Use this White-Rodgers S84A-410 to repair your thermostat.

The S84A-410 is a 40VA plate-mounted transformer with primary voltages of 120V/240V and secondary voltages of 24V. The secondary voltage is either ungrounded or grounded. It is suitable for use in general lighting applications. This transformer has a power factor of 0.6 and a BIL rating of 40V. A steel mounting plate and brass bushing are included with the transformer.

The White-Rodgers S84A-410 is a 40VA, 120V-24V, 120/240 VAC, single phase. This assembly uses the panel cavity knockout and comes with the cover plate for flush mounting.

The 40VA 120V-24V PLATE MOUNTED TRANSFO by WHITE-RODGERS is a special order item. Click on the button below to get a full overview of this product.

The WHITE-RODGERS S84A-410 024 Volt 40 VA 120/240 volt Plate Mounted Transformer is an electromechanical device designed to step down high voltage primary power to safer levels for use in low voltage lighting systems. With an operating temperature range between -40 degrees F and 185 degrees F, this transformer can be used in a variety of applications. This WHITE-RODGERS S84A-410 024 Volt 40 VA 120/240 volt Plate Mounted Transformer has been tested and found compliant with the following standards: UL486, CSA C22.2 No.

The White-Rodgers S84A-410 is a 1 in. x 1 in. size, 120/240 volt, single phase, 40 VA non-programmable load controller with a two year warranty and is manufactured by White-Rodgers. The White-Rodgers S84A-410 has a plate mounting configuration with an orientation of horizontal and vertical and is designed to protect loads from overcurrent situations and to provide power transfer functions between input and output circuits when the voltage at the output terminal decreases below the voltage at the input terminal. This device will switch off after a minimum time delay on an overcurrent condition.

WHITE-RODGERS S84A-410 S84A-410 40VA 120V-24V PLATE MOUNTED TRANSFORMER: This product is a brand new genuine WHITE RODGERS OEM replacement part. (This product is not manufactured by General Electric.