3/8" FLARE X 1/4" NPT(M) ANGLE FUSI
The FIROMATIC 1213 - 3/8" FLARE X 1/4" NPT(M) ANGLE FUSIBLE VALVE is a low cost, high quality, zero failure on/off regulating valve that can be used in just about any application. The FIROMATIC 1213 - 3/8" FLARE X 1/4" NPT(M) ANGLE FUSIBLE VALVE (O-Faucet 3000-100) is a great
The FIROMATIC 1213 - 3/8" FLARE X 1/4" NPT(M) ANGLE FUSIBLE VALVE is used in industrial applications as an instantaneous circulation or level control valve used to shut off flow, automatically open and close a level control element.
The FIROMATIC 1213-3/8" Flare x 1/4" NPT(M) Angle Fusible Valve, is a rugged liquid control valve designed for safe and error free operation in a wide range of service environments. Designed with a spring loaded ceramic disc fusible plug, the leak tight seal protects against overpressure, back pressure and vapor condensation. The flame arrestor on the fusible valve is factory installed and provides easily accessible protection against flashback. The
The Firomatic 1213 - 3/8" Flare X 1/4" NPT(M) Angle Valve has a wide range of applications from braking systems, tire pressure monitoring systems, windshield washer systems and more. Features: - Body Material: Cast iron & steel - Plug Material : Nylon and Rubber
*** This new valve is a full assembly, ready to install in an existing manifold. ** It includes a fusible disk that will rupture to prevent damage to downstream piping and equipment. ** The Valve Body and Stem are 304 Stainless Steel, with the Disk and Seat made from SS316, with Manganese Phosphate (SSP). ** The body size is 1/2" NPT(M) Threads. * The Temperature Range is rated at 250F with a 750 PS
FIROMATIC's 1213 Series for 3/8" Flare Mufflers is designed to handle the most demanding high-temperature and high pressure applications. Each valve is available in a variety of configurations. Features include: Fusible Valve Plug (ø 13mm x h 18mm) with AISI 304 Inconel X750, or DIN 1.4404 Stainless Steel; Steam-tight above 120° C; Resistant to Sulfuric Acid up to 65
The Fusible Valves are available in both 3/8" and 1/2" Flares. The valve body is constructed of brass and contains an interchangeable non-fusible element. There is also a flame arrestor which minimizes the risk of flashback, and eliminates the danger of explosion in case of broken valve seat.