ID BLOWER SERV SINGLE Amana-Amana B18590505S

ID BLOWER, SERV 50 HZ

The ID BLOWER, 50 Hz is ideally suited for any / all factory / industrial / utility applications. The ID Blower features a rugged cast housing and high efficiency forward curved impeller design which delivers a static pressure of 220 mm wg (25.4In WC) @0.5 mps (1.8Gr/Ft3).

Amana ID BLOWER SERV is used on the B18590505S

Amana-Amana B18590505S - ID Blower, Service, Single Coil, 60 Hz, 115 Volt, 60 HZ, 1 Phase, cc panel mounted

The Amana ID Blower Serv Single is designed for use with a clothes iron and has a rating of 30 watts at 120 volts.

The ID Blower is an economical solution for high-volume, low-pressure, continuous operation. This blower has a 12 SCFM @ 75 PSI with a 4 GPM air capacity and dies not require any flushing. The ID Blower is UL listed under file number E436684 and propane-powered.

The ID Blower is designed for use in residential or commercial lighting and signage applications where identifying individual equipment by a sound device is required. This standard duty, 1/2HP, 18,000 RPM blower has a totally enclosed fan cooled (TEFC) thermally protected motor. The unit is available in 115-120-208 and 240 volt input.

Just plug it in and push the button. That is all you have to do to introduce a maximum of smoke into your firebox through an easy-to-use blower system. Did you know that most wood-burning stoves don't possess a blower? This means that before you can create authentic flames, you have to blow air into the firebox yourself. Not with the ID Blower! This powerful fan is installed within the firebox, and its easy-to-use push button allows you to introduce smoke at the same time as convertibles, nozzles and other accessories. With easy snap-