Baldor Motor EM2515T 20hp1800rpm230/460v256T ODP

20hp1800rpm230/460v256T ODP

Baldor Motor EM2515T 20hp1800rpm230/460v256T ODP

Designed to provide and maintain smooth, efficient, single-phase electric motor operation. 1.0 Service Factor 1800 RPM, 25/46 frame, 230/460 volt ODP

The Baldor Motor EM2515T is a 20 horsepower, 1 phase, 1800 rpm, 3 phase motor (230 V), 256 ampere, Totally Enclosed Fan Cooled (TEFC) with ODP. The Baldor Motor EM2515T weighs 2,500 pounds and has a maximum starting current of 25 amps.

The EM2515T is a 2.5 HP (1800 RPM) Totally Enclosed Fan Cooled motor with 256T frame, 0.91 Service Factor and 230/460 Volt, 60 Hz, Single Phase or Three Phase with Overload Protection (DP). Electrical Connections: 3 Phase wye connected to 600V and 230 V receptacles; Four leads from NEMA to controls.

The Baldor EM2515T motor is premium commercial grade air-cooled motor, suitable for the harshest environments. This motor features a stainless steel shaft with an adjustable impeller, an open drip proof design and is pre-wired for use on a 230 or 460V electrical system. The EM2515T has been engineered with rugged materials which include; cast iron frame & cover, 6061-T6 aluminum end bells and base, stainless steel front & rear mounting flanges, and bronze bushings. The Baldor EM2515T is built to last under the most extreme conditions

Providing quality performance and ease of maintenance, this Baldor motor is energy efficient, and features an ODP output diode protection.

The Baldor Motor EM2515T 1/2 Floor Standing twin shell centrifugal pump has a cast iron head, aluminum bronze body, flanged outlet and inlet (C-face), and mechanical seal. It is double volute casing is split and bolted together which provides for easy assembly and maintenance. A hole in the shell bottom permits installation of external drainage. The motor is equipped with two plunger type ball bearings, an anti-kickback control system to minimize gear damage, and a dual voltage winding that allows use to operate at either 230 or 460 volts with no field wiring changes. A 3/8"