OTC OTC305227 305227 Ball Joint Installation Adapter

BALL JOINT INSTALLATION ADAPTER

The 5/8"-18 internal end fits into the same threading on base of push puller or forcing screw

This is a standard adapter used for pulling items such as bearings, shafts and pump parts

It fits the 3/4"-16 external end of OTC 2200 threaded mainshaft

Internal end is 5/8”-18, external end is 3/4"-16 and length of 2-1/4”

The 8013 adapter can also be used as a separating disc on a puller to prevent bending or distortion of the work being pulled

The OTC 8013 (8013) Standard External/Internal Threaded Adapter is a standard thread adapter for use on the ends of push puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc

The OTC 8013 Standard External/Internal Threaded Adapter is used on the ends of push puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc

The OTC series adapters are a time saving solution to your problem

This adapter is used when a longer leg length is required to reach inside a part to be removed

Length 2-1/4"

The OTC 8013 is for use on the ends of push puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc

The OTC 8013 is a standard threaded adapter

Internal end is 5/8-18 thread, external end is 3/4"-16 thread and length of 2-1/8"

The OTC 8013 Standard External/Internal Threaded Adapter is for use on the ends of push puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc

The internal end is 5/8”-18 and the external end is 3/4"-16

The OTC 8013 is for use on the ends of push puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc

The threaded portion of the 8013 allows you to use a push/puller on either end